(Fig.
(Fig.
(Fig.
6.11.3 EPG Information
Where this is broadcast by the provider, the EPG function will provide you with information on the contents of various programmes:
>Use the arrow up/down keys to select the appropriate programme.
>Press either the EPG key or the blue function key (More) to display the information.
(Fig. 6-12) Lengthy text passages can be moved around by using the arrow up/down keys, or you can page back and forth by using the arrow left/right keys.
>Press the Back key to return to the previous table.
6.11.4 Exiting from EPG
>Press the Back key to return to normal operation.
6.12 Timer
Your receiver is provided with a timer. This enables you to make video recordings even when you are absent. The timer operation is indicated by a blinking LED in the display, which serves as a control. Timer operation can be interrupted by pressing the On/Standby key.
6.12.1 Programming by means of EPG
>Switch to the channel that carries the programme you wish to record.
>Press the EPG key.
The EPG table of the currently selected programme will be displayed (Fig.
>Use the arrow keys up/down to highlight the desired programme.
>Press the yellow function key (Record).
The data relating to the selected programme will now be stored, and will be displayed on screen for control purposes (Fig.
>In order to delete the timer marking, press the green function key (Delete) and confirm when requested to on screen.
>Press the Back key to return to the EPG table, and
to add further programming if you so wish.
or
>Press the TV/Radio key to return to normal
operation.
At the programmed time the receiver will switch to the selec- ted programme and will, if set appropriately, return to standby mode at the end of the programme.
22