TechniSat DigiPal1 manual

>Press the OK key to display the selection window for the OSD language. (Fig. 3-3)

>Use the arrow keys up/down to mark the required language.

>Confirm with OK, in order to advance to the selection of the preferred audio language. (Fig. 3-4)

>Use the arrow keys up/down to select the prefer- red audio language.

>Confirm with OK, to confirm the selection, and to pro- ceed to the selection of the time zone. (Fig. 3-5)

>Use the arrow keys up/down to select the time zone corresponding to your location.

>Confirm b y pressing OK to confirm your selection, and to proceed to the channel search function. (Fig. 3- 6)

>Please note the message displayed (Fig. 3-7)and commence the search by pressing OK.

An automatic programme scan will now commence, covering the entire input frequency range of the recei- ver. This process may take several minutes.

>Your box is ready for operation when the search is completed.

>Press the OK key to complete the initial installation and to switch to normal operation.

(Fig. 3-3)

(Fig. 3-4)

(Fig. 3-5)

(Fig. 3-6)

(Fig. 3-7)

9