Clarion CMD5 Radio Operations Recalling a preset station, Manual memory, Auto store, Preset scan

Radio Operations

Recalling a preset station

Atotal of 24 preset positions (6-FM1, 6-FM2, 6- FM3, 6-AM) exist to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically.

1.Press the [AM/FM] button and select the desired band (FM or AM).

2.Press the corresponding [DIRECT] button to recall the stored station.

*Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Manual memory

1.Select the desired station with seek tuning, manual tuning or preset tuning.

2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored stations remain at the memory position.

1.Press the [AM/FM] button and select the desired band (FM or AM).

2.Press and hold the [ENT] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.

1.Press the [ENT] button.

2.When a desired station is tuned in, press the [ENT] button again to continue receiving that station.

Note:

•Be careful not to press and hold the [ENT] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.

16 CMD5