CDIMP3IWMA Operations
Multi-session function
When a disc contains both normal CD type tracks and MP3IWMA type tracks, you can select which type of the recorded tracks to play.
• Switching mixed mode
Each time you press and hold the [ENT] button for 1 second or longer, the mixed mode is switched between
•Types of recording that can be played are as follows:
Setting | Set to | Set to | |
| |||
| |||
| CD | ||
| MP3 | ||
Disc | (Default value) | ||
Mixed with CD |
| Play MP31 | |
and MP3IWMA | Play CD | ||
WMA | |||
type tracks |
| ||
|
| ||
CD type track | Play CD | Play CD | |
only | |||
|
| ||
MP3IWMA | Play MP3IWMA | Play MP31 | |
type track only | WMA |
•After making these settings, remove the disc and then reinsert it.
Notes:
•When playing a CCCD (Copy Control CD), set the setting to CD type. When this is set to MP3IWMA type, the CD cannot be played normally in some cases.
•When playing the disc (contains CD tracks and MP3IWMA type tracks), there is no sound for MP3 type tracks if the setting "MUL
Loading a CD
For CD (12 cm)
CD SLOT
Insert a CD into the center of the CD SLOT with the label side facing up. While loading, "FILE READ" appears on the display; then the CD plays automatically.
Notes: '
•Never insert foreign objects into the CD SLOT.
•If the CD is not inserted easily, there may be another CD in the mechanism or the unit may
require service. | ,,{lCOM.ACT | [Q]m~~ |
•Discs not bearing the ~~\¥,J or ~ mark and CD- ROMs cannot be played by this unit.
•Some CDs recorded in
Backup Eject function
Just pressing the [~] button ejects the disc even if the power to the unit was not turned on. Press the [~] button and remove it when ejected.
•Do not try to put your hand or fingers in the CD SLOT. Also never insert foreign objects into the slot.
•Do not insert discs where adhesive comes out from cellophane tape or rental CD label, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.
Listening to a disc already loaded in the unit
Press the [DISC] button to select the CD/MP3 mode.
When the unit enters the CD/MP3 mode, play starts automatically.
*If there is no disc loaded, "NO DISC" appears on the display.
Pausing play
Press and
To resume CD play, press and hold the [':~~IE] button again.
18 CMD5