Clarion CMD5 CD changer functions, Selecting a CD, Scan play, Disc scan play, Disc repeat play

CD Changer Operations

CD changer functions

When an optional CD changer (additional DCZ625 CeNET changer required) is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers.

Press the [DISC] button to select the CD changer mode to start play. If 2 CD changers are connected, press the [DISC] button to select the CD changer for play.

*If "NO MAG" appears on the display, insert the magazine into the CD changer. "D-CHECK" appears on the display while the player loads (checks) the magazine.

*If "NO DISC" appears on the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer.

Note:

•Some CDs recorded in CD-R/CD-RW mode may not be usable.

ACAUTION

Depending on the recording format, CD-ROM discs may not play properly.

Pausing play

1.Press and hold the [':~~IE ] button for 1 second or longer to pause play. "PAUSE" appears on the display.

2.To resume CD play, press and hold the [':~~IE] button for 1 second or longer again.

Selecting a track

•Track-up

1.Press the [!] button to move ahead to the beginning of the next track.

2.Each time you press the [!] button, the track advances ahead to the beginning of the next track.

•Track-down

1.Press the [T] button to move back to the beginning of the current track.

2.Press the [T] button twice to move to the beginning of the previous track.

Fast-forward/fast-rewind

• Fast-forward

Press and hold the [!] button for 1 second or longer.

• Fast-rewind

Press and hold the [T] button for 1 second or longer.

Selecting a CD

1.Press the [~DISC~] button to select the desired disc.

*If a CD is not loaded in a slot of magazine, pressing the [~DISC--*]button can not work.

Scan play

Scan play locates and plays the first 10 seconds of each track on a disc automatically. This function continues on the disc until it is canceled.

*The scan play is useful when you want to select a desired track.

1.Press the [SCAN] button.

2.To cancel the scan play, press the [SCAN] button again.

Disc scan play

Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer. This function continues automatically until it is canceled.

*Disc scan play is useful when you want to select a desired CD.

1.Press and hold the [SCAN] button for 1 second or longer.

2.To cancel disc scan play, press the [SCAN] button again.

Repeat play

Repeat play continuously plays the current track. This function continues automatically until it is canceled.

1.Press the [REPEAT] button.

2.To cancel repeat play, press the [REPEAT] button again.

Disc repeat play

After all the tracks on the current disc have been played, disc repeat play automatically replays the current disc over from the first track. This function continues automatically until it is canceled.

1.Press and hold the [REPEAT] button for 1 second or longer.

2.To cancel disc repeat play, press the [REPEAT] button again.