TOA Electronics VM-2120 instruction manual Linkage Between Remote Microphone and ITS Extension

25. LINKAGE BETWEEN REMOTE MICROPHONE AND ITS EXTENSION

When adding the RM-210 Remote Microphone Extension, link it with the RM-200M Remote Microphone using the extension cable and mounting hardware supplied with the RM-210.

Step 1. Turn over both the RM-200M and the RM-210, and keep them in close contact with each other.

Step 2. Connect between both units using the extension cable.

Step 3. Using 4 supplied screws (marked with [ ] in the figure) and Linkage Bracket B, link both units together.

2 Extension cable	3 Linkage bracket B
RM-210	RM-200M

Bottom side

Step 4. Using 8 supplied screws ([ ] marking) and 2 pieces of Linkage Bracket A, fix both units securely.

Linkage bracket A

RM-210 RM-200M

Bottom side

Note: If incorrect or loose connection is found between both units, loosen all the bracket fixing screws to disassemble the units and then link them again with the screws.

59