Pioneer FH-P800BT operation manual Deleting preset numbers, Calling a number in the preset list

3Press MULTI-CONTROL to select a preset number that you want to assign a phone number to.

4Press and hold MULTI-CONTROL to dis- play MEMORY.

Push MULTI-CONTROL up or down to switch

MEMORY (memory) and DELETE (delete).

# If a phone number is already stored in the se- lected preset number, the new phone number will

overwrite the old one.

# For details on deleting, refer to Deleting preset numbers on this page.

5Select MEMORY and then press

MULTI-CONTROL to display the phone book.

6Turn MULTI-CONTROL to select the first

letter of the name you are looking for.

# You can also perform the same operation by

Deleting preset numbers

1Press LIST to display DIAL PRESET (pre- set number list).

Refer to Using the phone number list on page

2Turn MULTI-CONTROL to switch preset

numbers.

# You can also change the preset phone num- ber by pushing MULTI-CONTROL up or down.

3Press MULTI-CONTROL to select a preset phone number that you want to delete.

4Press and hold MULTI-CONTROL to dis- play MEMORY.

Push MULTI-CONTROL up or down to switch

MEMORY (memory) and DELETE (delete).

# About assigning , Assigning preset numbers on the previous page.

pushing MULTI-CONTROL up or down.

7Press MULTI-CONTROL to display en- tries.

The display shows the first three Phone Book entries starting with that letter (e.g. “Ben”, “Brian” and “Burt” when “B” is selected).

8Turn MULTI-CONTROL to select a phone book entry you want to store in the preset

list.

# You can also perform the same operation by pushing MULTI-CONTROL up or down.

9Press MULTI-CONTROL to display the

phone number list of the selected entry.

# You can also display the phone number list of the selected entry by pushing MULTI-CONTROL

right.

# If several phone numbers are included in an

entry, select one by turning MULTI-CONTROL.

# You can scroll literal information by pressing

and holding DISP.

# If you want to go back and select another entry, push MULTI-CONTROL left.

10Press MULTI-CONTROL to store the phone number in the preset list.

5Select DELETE and then press MULTI-CONTROL to delete the preset phone number.

Calling a number in the preset list

After finding the number you want to call in the preset list, you can select the entry and make a call.

1Press LIST to display DIAL PRESET (pre- set number list).

Refer to Using the phone number list on page

2Turn MULTI-CONTROL to select the

phone number.

# You can also change the phone number by pushing MULTI-CONTROL up or down.

3Press MULTI-CONTROL to make a call.

4To end the call, press .