![](/images/new-backgrounds/1262584/262584119x1.webp)
Section
06
Available accessories
Selecting a SIRIUS channel directly
When using the remote control, you can select the SIRIUS channel directly by entering the de- sired channel number.
1 Press DIRECT.
Channel number input display appears.
2Press 0 to 9 to enter the desired channel
number.
# You can cancel the input number by pressing
CLEAR.
3Press DIRECT.
The SIRIUS channel of entered number is selected.
#After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.
Switching the SIRIUS display
%Press DISP to switch the SIRIUS display. Each press of DISP changes the SIRIUS dis- play in the following order:
Play
program
# Play time is displayed during the Instant Re- play mode. Refer to Using Instant Replay function
on page 62.
# Play time display indicates the time inverted from the live broadcast. Play time is displayed in negative number.
%When you find a station that you want to store in memory press one of preset tun- ing buttons 1 to 6 and hold until the SIRIUS preset number stops flashing.
The number you have pressed will flash in the SIRIUS preset number indicator and then re- main lit. The selected station has been stored in memory.
The next time you press the same preset tun- ing button the station is recalled from mem-
ory.
# You can also recall stations assigned to preset tuning numbers by pushing
Introduction of advanced operations
1Press
2Use
FUNCTION.
The function selection menu is displayed. Turn to change the menu option. Press to select.
3Turn
CHANNEL MODE (channel select mode set-
Notes
Storing and recalling broadcast stations
You can easily store up to six broadcast sta- tions for later recall.
!Only the remote control can operate this function.
!Six stations for each band can be stored in memory.
!You can also select the function by pressing FUNCTION on the remote control.
!To return to the ordinary display, press BAND.
!If you do not operate functions within about 30 seconds, the display is automatically re- turned to the ordinary display.
!During the Instant Replay mode, you can se- lect PAUSE (pause). Refer to Using Instant Re- play function on page 62.
!PAUSE is the same as that of the
60
En