Pioneer FH-P800BT operation manual Setting the clock, Calendar

Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.

1Function display

! Shows the function status.

1Press SOURCE and hold until the unit turns off.

2Press MULTI-CONTROL and hold until the initial setting menu appears in the dis- play.

3Turn MULTI-CONTROL to select one of the initial settings.

Turn MULTI-CONTROL to switch between the functions in the following order.

CALENDAR (calendar)—CLOCK (clock)— AUX1 (auxiliary input 1)—AUX2 (auxiliary input 2)—DIMMER (dimmer)—

S/W CONTROL (rear output and subwoofer controller)—MUTE (sound muting/attenua- tion)—BUILT-IN AMP (power amp setting)— DEMONSTRATION (feature demo)— EVER-SCROLL (ever scroll)—BT AUDIO (Blue- tooth audio)—PIN CODE INPUT (pin code input)—EDIT DEVICE NAME (device name edit)—BT VERSION INFO. (Bluetooth version information)—BT RESET (Bluetooth reset)— SOFTWARE UPDATE (software update)

Use the following instructions to operate each

particular setting.

# You can also select the function by pressing

FUNCTION on the remote control.

# To cancel initial settings, press BAND.

The calender display adjusted in this mode ap- pears when the telephone source is selected or sources and the feature demo are off.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select

CALENDAR.

3Push MULTI-CONTROL left or right to select the segment of the calendar display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the calendar display: Day—Month—Year

As you select segments of the calendar dis- play the segment selected will blink.

4Push MULTI-CONTROL up or down to set the date.

Pushing MULTI-CONTROL up will increase the selected day, month or year. Pushing

MULTI-CONTROL down will decrease the se- lected day, month or year.

Setting the clock

Use these instructions to set the clock.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2Use MULTI-CONTROL to select CLOCK.

3Push MULTI-CONTROL left or right to select the segment of the clock display you wish to set.

Pushing MULTI-CONTROL left or right will se- lect one segment of the clock display: Hour—Minute

As you select segments of the clock display, the selected segment blinks.

4Push MULTI-CONTROL up or down to put a clock right.