Pioneer FH-P800BT operation manual Setting automatic answering, Echo canceling and noise reduction

4Use the cellular phone to perform phone book transfer.

Perform phone book transfer using the cellu- lar phone. For detailed instructions, refer to the instruction manual that came with your

cellular phone.

# Depending on the cellular phone, phone book

can only be transferred one by one.

# The display indicates how many entries have been transferred and the total number to be transferred.

5DATA TRANSFERRED is displayed and phone book transfer is completed.

Setting automatic answering

1 Display the function menu.

Refer to Introduction to advanced operations on page 39.

2Use MULTI-CONTROL to select

AUTO ANSWER.

3Press MULTI-CONTROL to turn auto-

matic answering on.

# To turn automatic answering function off, press MULTI-CONTROL again.

Echo canceling and noise reduction

Operating this unit

Setting the automatic connection

It is possible to set the automatic connection between your cellular phone and this unit. If this function is set to on, connection between your cellular phone and this unit will take place automatically as soon as the two devices are less than a few meters apart.

!With some cellular phones, it may not be possible to perform the automatic connec- tion.

1 Display the function menu.

Refer to Introduction to advanced operations on page 39.

2Use MULTI-CONTROL to select

AUTO CONNECT.

3Press MULTI-CONTROL to turn auto-

matic connection on.

# To turn automatic connection off, press MULTI-CONTROL again.

Note

Automatic connection is performed in the regis- tration number order.

1 Display the function menu.

Refer to Introduction to advanced operations on page 39.

2Use MULTI-CONTROL to select

ECHO CANCEL.

3Push MULTI-CONTROL left or right to select the desired setting.

OFF (off)—LOW—MID—HIGH

# This function can be performed even while talking on the phone. In this case, press MULTI-CONTROL to switch to ECHO CANCEL.

Switching the ring tone

1 Display the function menu.

Refer to Introduction to advanced operations on page 39.

2Use MULTI-CONTROL to select RING TONE in the function menu.

3Push MULTI-CONTROL left or right to select the desired setting.

OFF (off)—BEEP1—BEEP2—BEEP3