Pioneer FH-P800BT operation manual Using the equalizer, Recalling equalizer curves, Fader/Balance

Section

03

Audio Adjustments

Introduction of audio

Using balance adjustment

adjustments

You can change the fader/balance setting so

that it can provide the ideal listening environ-

ment in all occupied seats.

1 Display the audio menu.

Refer to Introduction of audio adjustments on

this page.

1 Audio display

2 Use MULTI-CONTROL to select

Shows the audio adjustment status.

FADER/BALANCE.

1 Press MULTI-CONTROL to display the

3 Push MULTI-CONTROL up or down to

main menu.

adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or

2 Use MULTI-CONTROL to select AUDIO.

down, the front/rear speaker balance moves

Turn to change the menu option. Press to se-

towards the front or rear.

lect.

F 15 to R 15 is displayed as the front/rear

The audio menu is displayed.

speaker balance moves from front to rear.

3 Turn MULTI-CONTROL to select the

# 0 is the proper setting when only two speakers

are used.

audio function.

# When the rear output setting is

Turn MULTI-CONTROL to switch between the

REAR SP :S/W, you cannot adjust front/rear

audio functions in the following order.

speaker balance. Refer to Setting the rear output

FADER/BALANCE (balance adjustment)—

and subwoofer controller on page 49.

EQUALIZER (graphic equalizer adjustment)—

G.EQ ADJUST (7-band graphic equalizer ad-

4 Push MULTI-CONTROL left or right to

justment)—LOUDNESS (loudness)—SUB W1

adjust left/right speaker balance.

(subwoofer on/off setting)—SUB W2 (subwoo-

Each time MULTI-CONTROL is pushed left or

fer setting)—BASS BOOST (bass boost)—

right, the left/right speaker balance moves to-

HIGH PASS FILTER (high pass filter)—SLA

wards the left or right.

(source level adjustment)

L 15 to R 15 is displayed as the left/right

# You can also select the audio function by

speaker balance moves from left to right.

pressing AUDIO on the remote control.

# You can select the SUB W2 only when sub-