Pioneer FH-P800BT Using subwoofer output, Adjusting loudness, Adjusting subwoofer settings

Section

03

Audio Adjustments

3 Push MULTI-CONTROL left or right to

Using subwoofer output

select the equalizer band to adjust.

This unit is equipped with a subwoofer output

Each time MULTI-CONTROL is pushed left or

which can be turned on or off.

right, equalizer bands are selected in the fol-

lowing order:

1 Display the audio menu.

50HZ—125HZ—315HZ—800HZ—2KHZ—

Refer to Introduction of audio adjustments on

5KHZ—12.5KHZ

page 44.

4 Push MULTI-CONTROL up or down to

2 Use MULTI-CONTROL to select SUB W1.

adjust the level of the equalizer band.

Each time MULTI-CONTROL is pushed up or

3 Press MULTI-CONTROL to turn subwoo-

down, the level of the equalization band in-

fer output on.

creases or decreases.

NORMAL appears in the display. Subwoofer

+6 to –6 is displayed as the level is increased

output is now on.

or decreased.

# To turn subwoofer output off, press

# You can then select another band and adjust

MULTI-CONTROL again.

the level.

4 Push MULTI-CONTROL left or right to

5 Press BAND to cancel the 7-band gra-

select the phase of subwoofer output.

phic equalizer adjustment.

Push MULTI-CONTROL left to select reverse

phase and REVERSE appears in the display.

Adjusting loudness

Push MULTI-CONTROL right to select normal

phase and NORMAL appears in the display.

Loudness compensates for deficiencies in the

Adjusting subwoofer settings

low- and high-sound ranges at low volume.

1 Display the audio menu.

When the subwoofer output is on, you can ad-

just the cut-off frequency and the output level

Refer to Introduction of audio adjustments on

of the subwoofer.

page 44.

Only frequencies lower than those in the se-

2 Use MULTI-CONTROL to select

lected range are outputted from the subwoo-

LOUDNESS.

fer.

3 Press MULTI-CONTROL to turn loudness

! When the subwoofer output is on, you can

select SUB W2.

on.

1 Display the audio menu.

Loudness level (e.g., MID) appears in the dis-

play.

Refer to Introduction of audio adjustments on

# To turn loudness off, press MULTI-CONTROL

page 44.

again.

2 Use MULTI-CONTROL to select SUB W2.

4 Push MULTI-CONTROL left or right to

3 Push MULTI-CONTROL left or right to

select a desired level.

select cut-off frequency.

Each time MULTI-CONTROL is pushed left or

Each time MULTI-CONTROL is pushed left or

right, level is selected in the following order:

right, cut-off frequencies are selected in the

LOW (low)—MID (mid)—HIGH (high)

following order:

50HZ—63HZ—80HZ—100HZ—125HZ