![](/images/new-backgrounds/1262584/262584141x1.webp)
|
|
| Section |
| Available accessories | 06 | |
|
|
|
|
TV tuner | ! 12 stations for each band can be stored in | ||
|
| memory. |
Basic Operations
You can use this unit to control a TV tuner, which is sold separately.
For details concerning operation, refer to the TV tuner’s operation manual. This section pro- vides information on TV operations with this unit, which differs from that described in the TV tuner’s operation manual.
1Band indicator
2Preset number indicator
3Channel indicator
%Select a band Press BAND.
%Select a channel (step by step) Push
%Seek tuning
Push and hold
Notes
!Band can be selected from TV1 or TV2.
!You can cancel seek tuning by pushing
!While pushing and holding
MULTI-CONTROL.
1 Press LIST.
Preset screen is displayed.
2Use
Turn to change the preset number. Press and
hold to store.
# You can also store the station in memory by pushing and holding
3Use
Turn to change the station. Press to select.
# You can also change the station by pushing
# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.
Using the remote control
You can also store and recall stations assigned to preset tuning numbers P 1 to P 6 by using the remote control.
%When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.
The number you have pressed will flash in the preset number indicator and then remain lit. The selected station has been stored in mem- ory.
The next time you press the same preset tun- ing button the station is recalled from mem-
ory.
# You can also recall stations assigned to preset tuning numbers by pushing
Available accessories
Storing and recalling broadcast stations
You can easily store up to 12 broadcast sta- tions for later recall.
Storing the strongest broadcast stations sequentially
1Press
En 71