![](/images/new-backgrounds/1262584/26258483x1.webp)
Section
02
Operating this unit
Making a call by entering phone number
Important
Be sure to park your vehicle and apply the park- ing brake when performing this operation.
1 Display the function menu.
Refer to Introduction to advanced operations on page 39.
2Use
NUMBER DIAL.
# You can also enter in this menu from the standby display by pressing DIRECT on the re- mote control.
3Push
select a number.
# You can also input numbers by pressing 0 to 9 on the remote control.
4Push
sition.
# Up to 24 digits can be entered.
5When you finish entering the number, press
Call confirmation appears.
6Press
7To end the call, press .
Clearing memory
1 Display the function menu.
Refer to Introduction to advanced operations on page 39.
2Use
CLEAR MEMORY.
3Push
PHONE BOOK (phone
phone
#If you want to clear the entire Phone Book, call history list and preset phone number, select
ALL CLEAR.
4Push
CLEAR MEMORY: YES is displayed. Clearing
memory is now on standby.
# If you do not want to clear the memory that you have selected, push
5Press
CLEARED is displayed and data on the se- lected item is cleared from this unit’s memory.
Changing the phone book display order
1 Display the function menu.
Refer to Introduction to advanced operations on page 39.
2Use
INVERT NAMES YES is displayed.
3Press
Pressing
Selecting menu language
Menu language related to Bluetooth audio/tel- ephone can be changed.
!Some characters may not be displayed properly.
1 Display the function menu.
Refer to Introduction to advanced operations on page 39.
2 Use
42
En