| Section |
Operating this unit | 03 |
|
|
%Press and hold OPEN/CLOSE to turn the
LCD panel horizontal.
# To return to original position, press and hold
OPEN/CLOSE again.
# The LCD panel returns to the original position
automatically with beeping sound 10 seconds after operation.
Radio
Basic Operations
Operating this unit
1Source icon
2Band indicator
3Preset number indicator
4Frequency indicator
5LOCAL indicator
Appears when local seek tuning is on.
65 (stereo) indicator
Appears when the selected frequency is being broadcast in stereo.
1Touch the source icon and then touch RADIO to select the radio.
2Touch BAND to select a band.
Touch BAND until the desired band (FM1, FM2, FM3 for FM or AM) is displayed.
3To perform manual tuning, briefly
touch c or d.
# You can also perform manual tuning by press- ing – or + (TRACK).
4To perform seek tuning, keep touching c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta- tions. Seek tuning starts as soon as you release
the key.
# You can also perform seek tuning by pressing and holding – or + (TRACK).
En 19