| Section |
Available accessories | 04 |
|
|
2Touch BSSM on the function menu to turn BSSM on.
BSSM begins to flash. While BSSM is flashing the 12 strongest broadcast stations will be stored in order from the lowest channel up.
When finished, BSSM stops flashing.
# To cancel the storage process, touch BSSM again.
3Touch ESC to return to the TV picture.
# To return to the previous display, touch BACK.
Note
Storing broadcast stations with BSSM may re- place broadcast stations you have saved using P01 to P12.
Digital Signal Processor
Introduction of DSP adjustments
You can use this unit to control
!Some functions may differ depending on the
Important
When a
1DSP display
Shows the DSP function names.
By carrying out the following settings/adjust- ments in the order shown, you can create a fi-
1Setting the speaker setting
2Using the position selector
3Auto TA and EQ
4Adjusting the time alignment
5Adjusting the speaker output levels using a test tone
6Selecting a
7Adjusting the speaker output levels
8Adjusting
1Touch AV MENU and then touch DSP MENU to display the DSP function names.
The DSP function names are displayed and operable ones are highlighted.
Available accessories
En 73