
| Section |
Operating this unit | 03 |
|
|
2Touch AUTO FLAP to select the display to open/close automatically or manually. Each time you touch AUTO FLAP it switches between the following settings:
!ON – The LCD panel will be opened or closed automatically with the turning of the ignition switch on or off
!OFF – You have to press OPEN/CLOSE to open/close the LCD panel
Switching the iPod charge setting
You can turn the iPod charge setting on or off while listening to an iPod.
!Listening AM radio while an iPod is charged from this unit may generate noise. In this case, turn the iPod charge setting off and noise is disappeared.
!Initially, this function is set to on.
1Touch NEXT on the system menu.
2Touch iPod CHARGE to turn the iPod
charge setting on.
# To turn the iPod charge setting off, touch iPod CHARGE again.
Note
For maximum performance, we recommend that you use the latest version of the iPod software.
Selecting the OSD color
You can change the OSD color.
1Touch NEXT on the system menu.
2Touch OSD COLOR to select the desired color.
BLUE
Selecting the illumination color
You can select a desired color from red and blue.
1 Touch NEXT on the system menu.
2Touch ILLUMI COLOR to select the de- sired color.
BLUE
Adjusting the response positions of the touch panels (Touch Panel Calibration)
If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response po- sitions of the touch panel. There are two ad- justment methods:
!Make sure to use the supplied pen for ad- justment, and gently touch the screen. If you press the touch panel forcefully, the touch panel may be damaged. Do not use a sharp pointed tool such as ballpoint pen or a mechanical pen. Otherwise the screen is damaged.
!If touch panel adjustment cannot be per- formed properly, consult your local Pioneer dealer.
1Touch the source icon and then touch
OFF to turn this unit off.
# When the source icon is not displayed, you can display it by touching the screen.
2Press and hold EJECT (h).
The
3Touch each of the arrows on the four corners of the screen with the touch panel
adjustment pen.
# To cancel the adjustment, press and hold
VOLUME/MUTE.
4Press EQ to complete the
The adjusted position data is saved.
# Do not turn off the engine while saving the ad- justed position data.
Operating this unit
En 47