Section
03
Operating this unit
Note
Listening AM radio while an iPod is charged from this unit may generate noise. In this case, turn the iPod charge setting off and noise is disap- peared. (Refer to Switching the iPod charge setting on page 47.)
Storing and recalling broadcast frequencies
You can easily store up to six broadcast fre- quencies for later recall.
!Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory.
1Touch LIST to display the preset list.
2When you find a frequency that you want to store in memory keep touching one of preset tuning keys P1 to P6 until the beep sounds.
The selected radio station frequency has been stored in memory.
The next time you touch the same preset tun- ing key the radio station frequency is recalled from memory.
3Touch ESC to return to the ordinary dis- play.
Note
You can also use a and b to recall radio station frequencies assigned to preset tuning keys P1 to P6.
Introduction of advanced operations
1Touch AV MENU and then touch FUNCTION MENU to display the function names.
The function names are displayed and oper- able ones are highlighted.
2Touch ESC to return to the frequency
display.
# To return to the previous display, touch BACK.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning keys P1 to P6 and once stored there you can tune in to those frequencies with the touch of a key.
!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using P1 to P6.
%Touch BSM on the function menu to turn BSM on.
BSM begins to flash. While BSM is flashing the six strongest broadcast frequencies will be stored under preset tuning keys P1 to P6 in order of their signal strength. When finished,
BSM stops flashing.
# To cancel the storage process, touch BSM again.
Tuning in strong signals
Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.
%Touch LOCAL on the function menu to set the sensitivity.
Touch LOCAL repeatedly until the desired level of sensitivity appears in the display.
There are four levels of sensitivity for FM and two levels for AM:
FM: OFF—LEVEL1—LEVEL2—LEVEL3—
LEVEL4
AM: OFF—LEVEL1—LEVEL2
The LEVEL4 setting allows reception of only
the strongest stations, while lower settings let you receive progressively weaker stations. 
20
En