Setting the DivX subtitle file

Section

03Operating this unit

!With some discs, the parental lock may be ac- tive only on the scenes with certain levels. The playback of those scenes will be skipped. For details, refer to the instruction manual that came with the discs.

Changing the level

You can change the set parental lock level.

1 Touch NEXT on the DVD setup menu.

Notes

!Up to 42 characters can be displayed on one line. If more than 42 characters are set, the line breaks and the characters are displayed on the next line.

!Up to 126 characters can be displayed on one screen. If more then 126 characters are set, the excess characters will not be displayed.

2Touch PARENTAL.

3Touch 0 to 9 to input the registered code number.

4Touch ENTER.

This enters the code number, and you can now change the level.

#If you input an incorrect code number, the

icon is displayed. Touch C and input the cor- rect code number.

#If you forget your code number, refer to If you forget your code number on this page.

5Touch any of 1 to 8 to select the desired level.

The new parental lock level is set.

If you forget your code number

Refer to Changing the level on this page, and touch C 10 times. The registered code number is canceled, letting you register a new one.

You can select whether to display DivX exter- nal subtitles or not.

!The DivX subtitles will be displayed even when CUSTOM is selected if no DivX exter- nal subtitle files exist.

1Touch NEXT on the DVD setup menu.

2Touch DivX SUB TITLE to select the de- sired subtitle setting.

!ORIGINAL – Display the DivX subtitles

!CUSTOM – Display the DivX external subti- tles

Displaying your DivX® VOD registration code

In order to play DivX VOD (video on demand) content on this unit, you first need to register the unit with your DivX VOD content provider. You do this by generating a DivX VOD registra- tion code, which you submit to your provider.

1Touch NEXT on the DVD setup menu.

2Touch DivX VOD.

Your 8-digit registration code is displayed.

!Make a note of the code as you will need it when you register with a DivX VOD provider.

Setting for digital output

Audio which is outputted from digital output of this unit can be selected. Normally, set to STREAM. If this unit’s digital output is not used, there is no need to change settings.

!Selecting Linear PCM enables you to switch the output channel if playing the fol- lowing type of discs. (Refer to Selecting audio output on page 28.)

— Dual mono mode DVD video discs

1Touch NEXT on the DVD setup menu.

2Touch DIGITAL OUTPUT to select the de- sired digital output setting.

!STREAM – The Dolby Digital/DTS signal is output as it is (initial setting)

!Linear PCM – The Dolby Digital/DTS signal

is converted to and output as a linear PCM signal

40 En