Interface Status | Patton electronic 4020 Series guide

SmartLink 4020 Getting Started Guide	4 • Network—WAN

Status

Shows the status of key WAN network settings as conﬁgured under WAN settings

Interface Status

Figure 5. Internet Status window

Enabled

Yes indicates the WAN interface is enabled and ready to be used.

Service

Either Routed or Bridged, displays whether the SmartLink’s WAN interface connection is operating in a routed or bridged mode.

Protocol

Indicates that the Ethernet protocol is being used to transfer data.

Interface Status

Either Up or Down.

Network Settings

These are the details of your WAN network settings.

Dynamic IP Assignment

Displays Yes (via DHCP) if you are using a dynamic IP address or No if a dynamic IP address is not being used.

IP address

The IP address of the SmartLink on the WAN interface.

Status

29

Image 29

Patton electronic 4020 Series manual Interface Status, Network Settings

Contents

SmartLink Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony None System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables Structure About this guideAudience Safety when working with electricity Precautions General conventions Typographical conventions used in this documentGeneral observations General information Chapter contents SmartLink SmartLink 4020 overview SmartLink installation Do the following Installing the router Connect to the Internet service provider System information System Uptime Home System Uptime System informationWAN IP Address LAN IP Address System Status Network-WAN WAN Priority Tag Ieee 802.1q Interface Status Network SettingsStatus Settings Internet Conﬁguration Device Operating ModeObtain WAN conﬁguration dynamically Specify ﬁxed WAN conﬁguration Authentication Enable PPPoESettings WAN PPPoE Conﬁguration WAN MAC Address Spoofed Conﬁguring Dynamic DNSMAC Spooﬁng Conﬁguration Saving your work MTU SizeWAN Vlan Conﬁguration Enable Voice QoS QoS Quality of ServiceToS/DiffServ Assured Bandwidth for Voice IPSec Conﬁguration Outbound AH Authentication Key HEX Outbound AH Authentication AlgorithmOutbound ESP Authentication Key HEX Inbound AH Authentication Algorithm Inbound ESP Authentication Key HEX Network-LAN Dhcp Client Network Information Server SettingsStatic Address Assignment Viewing the Dchp Client Table Dynamic Routing RoutingStatic Routing Viewing the Routing Table IP Filtering Port ForwardingReserved Ports Port Forwarding to LAN Filter IP Range Telephony Telephony Telephony Phone Line Status VoIP StatusVoIP Server Registration Status User Name Caller ID SettingSubscribed for Voicemail Messages waiting SIP Conﬁguration SIP Server SettingsGateway Settings VoIP Vlan Conﬁguration SIP ExtensionsRTP Telephone Event Conﬁguration SIP Parameters SIP Timer Values millisecondsHook Flash Mime Type RTP Parameters NAT Traversal Jitter Buffer Audio/CODEC ConﬁgurationPacketization FAX without T.38 Use G.711 fax Phone 1 & Phone User Information Supplementary Service Activation Call Forward All Message Waiting IndicatorSelective Call Forward Three-Way Conferencing Dial Out Type Selective Call Forward Settings Call Forward Settings Incoming Call Block Http Digest SettingBlock Caller ID Outgoing Call Block Line 2 Speed Dial Settings Line 1 Speed Dial SettingsSpeed Dial Speed Dial Serv System System System New Root Password Set Security PasswordNew User Password Web Page Protect Enable Syslog Conﬁrm new passwordConﬁguration Logging Debug Server Enable DebugDebug Connect Port Saving your work Enable Http Service AccessEnable Ping Reply Localization Dial Tone Call Progress TonesPrompt Tone Conﬁrm Tone Busy Tone Distinctive Ring SettingRing Back Tone Off Hook Warning Name Value Supplementary Service Keys Block Anonymous Calls Call forward selectiveWarm Line IP Dialing Calling Preﬁx Keys Speed DialingIncome Caller ID Call Hold Voicemail accessCall Waiting call alternative Call Conference Control Timer Values FXS Port Ring Setting Snmp Trap Conﬁguration Snmp ConﬁgurationFXS Port Polarity Conﬁguration Routine Upgrade every xxx days Auto UpgradeSnmp Community Conﬁguration Snmp System Conﬁguration Enable Auto Upgrade Manual UpgradeAuto Upgrade Protocol Upgrade Server Reload Documentation Documentation link Introduction Logout Logout window Logout Contacting Patton for assistance Patton support headquarters in the USA Warranty coverageContact information Returns for credit Out-of-warranty serviceReturn for credit policy RMA numbers Appendix a Compliance information Compliance Safety ComplianceRadio and TV Interference CE notice Declaration of Conformity Appendix B Speciﬁcations Voice Connectivity Voice Processing signalling dependentConnectivity Fax and Modem Support IP Services Voice Services/FeaturesManagement Operating Environment Appendix C Dial plans Simple Dial Plan Sample Dial PlansNon-dialed Line Dial Plan Complex Dial Plan Sample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF