SmartLink 4020 Getting Started Guide | 2 • SmartLink installation |
|
|
Installing the router
Do the following:
Power adapter
| Internet Service |
|
|
|
| Provider |
|
|
|
| PC or | LAN | Phone | |
| LAN |
| Hub/Switch |
|
6 | 5 | 4 |
| 3 |
Power
www.patton.com
10/100 Ethernet
Phone
12V, 1A | WAN | LAN | 1 | 2 |
Power jack | Reset button | WAN port | LAN port | Phone jack 1 | Phone jack 2 |
Figure 2. SmartLink 4020 installation diagram
1Place the unit on a desktop or similar sturdy, flat surface that offers easy access to the cables. The unit should be installed in a dry environment with sufficient space to allow air circulation for cooling.
Note For proper ventilation, leave at least 2 inches (5 cm) of clearance at the sides, front, and rear of the unit.
2Set your LAN Local Area Connection Properties for Internet Protocol (TCP/IP) to Obtain an IP address automatically and to Obtain DNS server address automatically.
WARNING
CAUTION
Do not work on the system or connect or disconnect cables during periods of lightning activity.
The Interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to volt- age, current, anticipated temperature, flammability, and mechani- cal serviceability
3Plug in the telephone or telephones (see figure 2).
4Plug in the PC or LAN, or a LAN hub/switch.
Installing the router | 22 |
