SmartLink 4020 Getting Started Guide | 7 • System |
|
|
Timeval ::= time in milliseconds |
|
Repeatval ::= # of cycles to repeat |
|
Tonename ::= "RING_0" "RING_1" "RING_2" "RING_3" "RING_4" |
|
"RING_5" "RING_6" "RING_7" "RING_8" "RING_9" |
|
Idle ::= "IDLE" |
|
Active ::= "ON" "OFF" |
|
Inactive ::= Idle "(" Timeval ")" |
|
Active ::= Active "(" Timeval ")" |
|
Sequence ::= Active Active "," Sequence |
|
Repetition ::= "[" Sequence "]" Repeatval |
|
Repeat ::= "R" |
|
Cycle ::= Sequence Repetition |
|
Fullsequence ::= Cycle Cycle "," Fullsequence |
|
Cadence ::= Fullsequence Fullsequence "," Repeat Fullsequence |
|
"," Inactive "," Repeat |
|
Ring ::= Cadence |
|
Note The Bellcore standard ring cadence patterns are shown in table 2.
| Table 2. Bellcore standard ring cadence patterns |
|
|
Name | Value |
|
|
RING_0 | ON(2000), IDLE(4000), R |
|
|
RING_1 | ON(800), OFF(400), ON(800), IDLE(4000), R |
|
|
RING_2 | ON(400),OFF(200)]2,ON(800),IDLE(4000),R |
|
|
RING_3 | ON(300), OFF(200), ON(1000), OFF(200), ON(300), IDLE(4000), R |
|
|
RING_4 | ON(500) |
|
|
RING_5 |
|
|
|
Supplementary Service Keys
Supplementary Service Keys are key sequences that can enable and disable certain calling features from an analog phone handset attached to the SmartLink 4020.
Note The supplementary service keys must begin with a ‘*’,’#’ character, or f (flash hook) and follow a 1 or 2 numeric digit(s).
Localization | 71 |
