Conﬁguring Dynamic DNS | Patton electronic 4020 Series specs

SmartLink 4020 Getting Started Guide	4 • Network—WAN

found using a ﬁxed DNS name when the IP address changes. With Dynamic DNS cable modem and ADSL users can be found on the Internet using a DNS name.

The DNS server used for registration is operated by Dynamic Network Services, Inc., Dynamic DNS (DynDNS). You can ﬁnd detailed information about the company and the services it offers on the webpage www.dyndns.org. The company offers different levels of service. The basic services are offered free of charge, while the more advanced services are fee-based.

Figure 8. Dynamic DNS Service window

Conﬁguring Dynamic DNS

1.Select System > Conﬁguration.

2.Choose Sever: To enable DynamicDNS, select the name of the DYNDNS service from the drop- down menu (see ﬁgure 8).

3.Host Name: The host name is the name of the SL4020 as registered on the DYNDNS service.

4.Username: The user name is the user name as registered on the Dynamic DNS service.

5.Password: The password is the password as registered on the Dynamic DNS service.

MAC Spooﬁng Conﬁguration

Figure 9. MAC Spooﬁng Conﬁguration section of the Settings window

WAN MAC Address (Spoofed)

Only available when the unit is using the router mode. The spoofed MAC address to be used by the device’s WAN interfaces, the Ethernet address of the outgoing packets from the WAN interface would be replaced with this address. If blank, the WAN interfaces will use the hardware value of MAC

Settings

33

Image 33

Patton electronic 4020 Series manual Conﬁguring Dynamic DNS, MAC Spooﬁng Conﬁguration, WAN MAC Address Spoofed

Contents

SmartLink Mailsupport@patton.com Summary Table of Contents Table of Contents Vlan Network-LAN Telephony None System Table of Contents Documentation Calling Features List of Figures List of Figures List of Tables About this guide AudienceStructure Safety when working with electricity Precautions Typographical conventions used in this document General observationsGeneral conventions General information Chapter contents SmartLink SmartLink 4020 overview SmartLink installation Do the following Installing the router Connect to the Internet service provider System information System Uptime Home System Uptime System informationWAN IP Address LAN IP Address System Status Network-WAN WAN Priority Tag Ieee 802.1q Network Settings StatusInterface Status Settings Internet Conﬁguration Device Operating ModeObtain WAN conﬁguration dynamically Specify ﬁxed WAN conﬁguration Authentication Enable PPPoESettings WAN PPPoE Conﬁguration Conﬁguring Dynamic DNS MAC Spooﬁng ConﬁgurationWAN MAC Address Spoofed MTU Size WAN Vlan ConﬁgurationSaving your work Enable Voice QoS QoS Quality of ServiceToS/DiffServ Assured Bandwidth for Voice IPSec Conﬁguration Outbound AH Authentication Key HEX Outbound AH Authentication AlgorithmOutbound ESP Authentication Key HEX Inbound AH Authentication Algorithm Inbound ESP Authentication Key HEX Network-LAN Dhcp Client Network Information Server SettingsStatic Address Assignment Viewing the Dchp Client Table Dynamic Routing RoutingStatic Routing Viewing the Routing Table IP Filtering Port ForwardingReserved Ports Port Forwarding to LAN Filter IP Range Telephony Telephony Telephony VoIP Status VoIP Server Registration StatusPhone Line Status User Name Caller ID SettingSubscribed for Voicemail Messages waiting SIP Server Settings Gateway SettingsSIP Conﬁguration SIP Extensions RTP Telephone Event ConﬁgurationVoIP Vlan Conﬁguration SIP Parameters SIP Timer Values millisecondsHook Flash Mime Type RTP Parameters NAT Traversal Audio/CODEC Conﬁguration PacketizationJitter Buffer FAX without T.38 Use G.711 fax Phone 1 & Phone User Information Supplementary Service Activation Call Forward All Message Waiting IndicatorSelective Call Forward Three-Way Conferencing Dial Out Type Selective Call Forward Settings Call Forward Settings Incoming Call Block Http Digest SettingBlock Caller ID Outgoing Call Block Line 2 Speed Dial Settings Line 1 Speed Dial SettingsSpeed Dial Speed Dial Serv System System System New Root Password Set Security PasswordNew User Password Web Page Protect Enable Syslog Conﬁrm new passwordConﬁguration Logging Debug Server Enable DebugDebug Connect Port Saving your work Enable Http Service AccessEnable Ping Reply Localization Dial Tone Call Progress TonesPrompt Tone Conﬁrm Tone Busy Tone Distinctive Ring SettingRing Back Tone Off Hook Warning Name Value Supplementary Service Keys Block Anonymous Calls Call forward selectiveWarm Line IP Dialing Speed Dialing Income Caller IDCalling Preﬁx Keys Call Hold Voicemail accessCall Waiting call alternative Call Conference Control Timer Values FXS Port Ring Setting Snmp Conﬁguration FXS Port Polarity ConﬁgurationSnmp Trap Conﬁguration Routine Upgrade every xxx days Auto UpgradeSnmp Community Conﬁguration Snmp System Conﬁguration Enable Auto Upgrade Manual UpgradeAuto Upgrade Protocol Upgrade Server Reload Documentation Documentation link Introduction Logout Logout window Logout Contacting Patton for assistance Warranty coverage Contact informationPatton support headquarters in the USA Returns for credit Out-of-warranty serviceReturn for credit policy RMA numbers Appendix a Compliance information Compliance Safety ComplianceRadio and TV Interference CE notice Declaration of Conformity Appendix B Speciﬁcations Voice Connectivity Voice Processing signalling dependentConnectivity Fax and Modem Support IP Services Voice Services/FeaturesManagement Operating Environment Appendix C Dial plans Simple Dial Plan Sample Dial PlansNon-dialed Line Dial Plan Complex Dial Plan Sample Dial Plans Appendix D Calling Features Distinctive on Distinctive OFF