SmartLink 4020 Getting Started Guide | Table of Contents |
|
|
Enabled | 29 |
Service | 29 |
Protocol | 29 |
Interface Status | 29 |
Network Settings | 29 |
Dynamic IP Assignment | 29 |
IP address | 29 |
MAC address | 30 |
Subnet Mask | 30 |
Default Gateway | 30 |
Domain name | 30 |
DNS address | 30 |
DynDNS address | 30 |
VLAN | 30 |
Priority Tag | 30 |
Settings | 30 |
Internet Configuration | 31 |
Device Operating Mode | 31 |
Obtain WAN configuration dynamically | 31 |
Specify fixed WAN configuration | 31 |
WAN PPPoE Configuration | 32 |
Enable PPPoE | 32 |
Authentication | 32 |
Settings | 32 |
Idle Timeout | 32 |
Echo Timeout | 32 |
Echo Count | 32 |
Service Name | 32 |
AC Name | 32 |
Dynamic DNS | 32 |
Configuring Dynamic DNS | 33 |
MAC Spoofing Configuration | 33 |
WAN MAC Address (Spoofed) | 33 |
MTU Size | 34 |
MTU (Maximum Transfer Unit) Size | 34 |
WAN VLAN Configuration | 34 |
WAN VLAN Tag (IEEE 802.1q) | 34 |
WAN Priority Tag (IEEE 802.1q) | 34 |
Saving your work | 34 |
QoS (Quality of Service) | 35 |
Enable Voice QoS | 35 |
Assured Bandwidth for Voice | 35 |
Maximum Uplink Bandwidth Allowed | 35 |
Saving your work | 35 |
| 5 |
