| Section |
Operating this unit | 03 |
|
|
Initial Settings
Adjusting initial settings
Using the initial settings, you can customize various system settings to achieve optimal per- formance from this unit.
1Function display
Shows the function names.
Switching the auxiliary 1 setting
%Touch AUX1 on the initial menu to se- lect desired setting.
!VIDEO – an iPod with video capabilities connected with
!AUDIO – auxiliary device connected with stereo mini plug cable
!OFF – No auxiliary device is connected
Switching the auxiliary 2 setting
%Touch AUX2 on the initial menu to turn
auxiliary 2 setting on.
# To turn auxiliary 2 setting off, touch AUX2 again.
Operating this unit
1Touch the source icon and then touch OFF to turn this unit off.
2Touch the screen to display the touch panel keys.
3Touch AV MENU and then touch INITIAL MENU to display the function names.
The function names are displayed and oper-
able ones are highlighted.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function names, touch PREV.
4Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touch BACK.
Setting the rear output and subwoofer controller
This unit’s rear output (rear speaker leads out- put and RCA rear output) can be used for full- range speaker (FULL) or subwoofer (S.W) con- nection. If you switch the rear output setting to S.W, you can connect a rear speaker lead directly to a subwoofer without using an auxili- ary amp.
Initially, the unit is set for rear
!When the
1 Touch REAR SP on the initial menu.
Switching the auxiliary setting
Auxiliary devices connected to this unit can be activated individually. Set each AUX source to ON when using. For more information about connecting or using auxiliary devices, refer to Using the AUX source on page 48.
2Touch c or d next to REAR SP to switch the rear output setting.
Touch c to select
woofer and S.W appears in the display.
# When no subwoofer is connected to the rear
output, select FULL
# When a subwoofer is connected to the rear output, select S.W (subwoofer).
En 41