Pioneer AVD-W6000 owner manual Selecting the Video for the Display Independently

Basic Operation

Selecting the Video for the Display Independently

1. Set so that only the display video can be selected.

VCR 1

VCR 1

VO L 1 2

Hold for 2 seconds

2.Press V.SEL button.

Each press of the V.SEL button selects the desired video source in the following order: [VCR1] = [VCR2] = [RGB] = Exit to [VCR1]

Note:

•Return to the setting for switching all source at the same time, press the V.SEL button for 2 seconds.

•If you press the V.SEL button when video source are switched with the SEL/POWER button, [SELECTOR] appears in red on the screen, indicating that the audio and video can be switched simultaneously using the SELECTOR button.

•While switched to forced video from a back-up camera, if you try to select a video source with the V.SEL button, “INVALID” is displayed, indicating that you cannot switch the video source.

Selecting the Audio for Built-in Speaker Independently

1. Set so that only the built-in speaker audio can be switched.

VCR 1

VCR 1

VO L 1 2

Hold for 2 seconds

2.Press SP.SEL button.

Each press of the SP.SEL button selects the desired audio source in the following order: [VCR1] = [VCR2] = [RGB] = Exit to [VCR1]

Note:

•Return to the setting for selecting all source at the same time, press the SP.SEL button for 2 sec- onds.

•If you press the SP.SEL button when audio are switched with the SEL/POWER button, [SELEC- TOR] appears in red on the screen, indicating that the audio and video can be switched simultane- ously using the SELECTOR button.

13