Pioneer AVD-W6000 owner manual Forced VCR1 Input Setting

Forced VCR1 Input Setting

This product features a function that automatically switches to the video input into the VCR1 jack when a back-up camera is installed on your car. If this is the case, when the gear shift is in the REVERSE (R) position, the video automatically switches to VCR1. (The initial setting is [BATTERY]. For more details, consult with your dealer.)

1.Display a menu screen and select [CONTROL SETTING] menu. (Refer to page 16.)

2.Select an appropriate setting for the connection method.

C O N T R O L S E T T I N G

FORCED VCR1

POLARITY BATTERY

S E L E C T

[BATTERY]: When the gear shift is moved to the REVERSE (R) position, and the polari- ty of the connected lead wire (refer to page 32) is positive.

[GND]: When the gear shift is moved to the REVERSE (R) position, and the polarity of the connected lead wire (refer to page 32) is negative.

Note:

•Switching to the correct video setting may not occur. Confirm that directly after changing the set- ting, it changes to VCR1 when the gear shift is moved to REVERSE from another position.

•When the display changes to VCR1 video during normal drivings, reverse the settings.

CAUTION

This function is designed for use with a back-up camera only. Users may connect the VTR 1 input with “AUTOMATIC INPUT SWITCHING” only to such a back-up camera. Users must not connect any other devices to the VTR 1 input with “AUTOMATIC INPUT SWITCHING”.

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

22