Pioneer DEH-1100MP owner manual Operating this unit Other Functions, Adjusting initial settings

Section
02		Operating this unit
	Other Functions		# The clock display disappears temporarily
	Adjusting initial settings		when you perform other operations, but the clock
			display appears again after 25 seconds.
	Using the initial settings, you can customize
	various system settings to achieve optimal per-		Switching the auxiliary setting
	formance from this unit.
			It is possible to use auxiliary device with this
	1 Press SOURCE and hold until the unit		unit. Activate the auxiliary setting when using
	turns off.		auxiliary device connected to this unit.
	2 Press SOURCE and hold until function		1 Press FUNCTION to select AUX.
	name appears in the display.		Refer to Adjusting initial settings on this page.
	3 Press FUNCTION to select one of the in-		2 Press a or b to turn the auxiliary set-
	itial settings.		ting on or off.
	Press FUNCTION repeatedly to switch be-
	tween the following settings:		Using the AUX source
	Clock—AUX (auxiliary input)
			% Insert the stereo mini plug into the
	Use the following instructions to operate each
	particular setting.		input jack on this unit.
	# To cancel initial settings, press BAND.
	# You can also cancel initial settings by holding		Selecting AUX as the source
	down SOURCE until the unit turns off.		% Press SOURCE to select AUX as the
			source.
	Setting the clock
	Use these instructions to set the clock.
	1 Press FUNCTION to select clock.
	Refer to Adjusting initial settings on this page.
	2 Press c or d to select the segment of
	the clock display you wish to set.
	Pressing c or d will select one segment of the
	clock display:
	Hour—Minute
	3 Press a or b to put a clock right.
	Turning the clock display on or off
	You can turn the clock display on or off.
	! Even when the sources are off, the clock
		display appears on the display.
	% Press CLOCK to turn the clock display
	on or off.
	Each press of CLOCK turns the clock display
	on or off.

12 En