Jensen VM9313 Setup Menu, Accessing Menu Items, Adjusting a Feature, Setting Options Function

VM9313

SETUP MENU

To access system settings, press the SETUP button (31) on

the remote control or touch the button on the screen to enter the “SETUP” menu. The “GENERAL” sub-menu appears highlighted in blue.

	SETUP				12:27 AM
RADIO
Bluetooth	General	Language	Audio		BACK
Rating	Clock Mode		12Hr
Hardware	Clock	04 :	31	AM
P.VOL	Tuner Region		USA
TS Cal	Beep		On
Demo

Accessing Menu Items

Touch the sub-menu name or press the <<, >>, <<, or >> direction buttons (22,14, 17, 19) on the remote control to select a sub-menu (Language, Audio, Rating, etc.).

DIRECTION BUTTONS

The features available for adjustment under the highlighted sub-menu option will appear in the center of the screen.

Adjusting a Feature

1.Use the touchscreen or press the << or >> buttons (17, 19) on the remote control to select the feature to be adjusted.

2.Enter the option field for the feature you want to adjust by using the touchscreen or pressing the >/ button (18) on the remote control. A submenu appears in a second row with the selected option highlighted in blue.

3.Select a new value by using the touchscreen or pressing the >> or << buttons (14, 22) on the remote control.

4.Use the touchscreen or press the >/ button (18) on the remote control to confirm setup.

General Sub-menu Features

Setting	Options	Function
Clock	12Hr	Clock displays 12 hour time
Mode		using AM and PM.
	24Hr	Clock displays 24 hour time up
		to 23:59.
Clock	(HH:MM)	Clock appears in the top right
		corner of the screen and on the
		LCD screen during certain
		operations. NOTE: The AM/PM
		indication will change as you
		continue to adjust the hour past
		12.
Tuner	USA	FM Band: 87.9MHz -
Region		107.9MHz, channel separation
		@ 200kHz
		AM Band: 530kHz - 1710kHz,
		channel separation @ 10kHz
	Europe	FM Band: 87.6MHz -
		107.9MHz, channel separation
		@ 100kHz
		AM Band: 531kHz - 1602kHz,
		channel separation @ 9kHz
Beep	On	When turned on, an audible
		beep tone confirms each func-
		tion selection.
	Off	No beep sounds.

Language Sub-menu Features

If a DVD supports more than 1 Subtitle or Audio language, all the languages are available for selection during playback. If the selected language is not supported by the DVD, then the default language is used.

Setting	Options	Function
OSD	English	On Screen Display appears in
		English.
DVD Audio	English	DVD Audio is heard in English
		when the option is available.
DVD Subti-	English	DVD subtitles automatically
tle		appear in English when avail-
		able.
	Auto	DVD subtitles appear accord-
		ing to the default subtitle lan-
		guage specified on the disc.
	Off	DVD subtitles do not appear
		automatically.
Disc Menu	English	DVD menu (if applicable) is
		displayed in English.
Audio Sub-menu Features
Setting	Options	Function
DRC	Off	Employ the Dynamic Range
		Control for better playback for
	On
		low volumes.
Subwoofer	Off	Turn the subwoofer on/off.
	On
Sub.W	0	Subwoofer output IN phase
Phase
	180	Subwoofer output OUT OF
		phase
		NOTE: Depending on your
		installation, reversing the sub-
		woofer phase may increase
		Bass output.
Sub Filter	80Hz	Selecting a crossover fre-
		quency sets a cut-off frequency
	120Hz
		of the subwoofer's LPF (low-
	160Hz	pass filter) and the “SMALL”
		speakers' HPF (high-pass fil-
		ter). The Crossover frequency
		setting has no effect if the sub-
		woofer is set to “OFF” and any
		other speaker is set to
		“LARGE”.

10