veicolo.
•1ª VELOCITÁ (per principianti):
Con entrambe le mani sul volante premere il pedale dell’acceleratore; il veicolo si mette in moto ad una velocità ridotta di circa 4 Km/h.
•2ª VELOCITÁ (per esperti):
Con entrambe le mani sul volante premere il pedale dell’acceleratore; il veicolo si mette in moto ad una velocità di circa 8 Km/h.
•RETROMARCIA:
Abbassare con una mano la leva del cambio. Posizionare l’altra mano sul volante e premere con il piede l’acceleratore. Il veicolo procede in retromarcia ad una velocità di circa 4 Km/h.
•FRENO:
Per frenare alzare il piede dal pedale acceleratore, il freno entrerà in funzione automaticamente.
Insegnate al vostro bambino un uso corretto del veicolo per una guida sicura e divertente.
•Prima di partire assicurarsi che il percorso sia sgombro da persone o cose.
•Guidare con le mani sul volante e guardare sempre la strada.
•Frenare per tempo per evitare scontri.
•Inserire la 2ª velocità solo quando il bambino ha imparato correttamente l’uso del volante, della 1ª velocità e del freno.
•ATTENZIONE! in prima velocità, il veicolo é dotato di effetto differenziale come le vere automobili: su terreni lisci e con un solo bambino, le due ruote possono avere velocità diverse con possibilità di slittamento/rallentamento delle stesse.
•Se il veicolo agisce in condizioni di sovraccarico, come su sabbia soffice, fango o terreni molto sconnessi, l’interruttore di sovraccarico toglierà immediatamente potenza. L’erogazione di potenza riprenderà dopo alcuni secondi.
PROBLEMI?
IL VEICOLO NON FUNZIONA?
•Verificare che non ci siano cavi scollegati sotto il pulsante marcia.
•Controllare il funzionamento del pulsante marcia ed eventualmente sostituirlo.
•Controllare che la batteria sia attaccata all’ impianto elettrico.
IL VEICOLO NON HA POTENZA?
•Caricare le batterie. Se dopo la ricarica il problema persiste far controllare le batterie ed il caricabatterie da un centro assistenza.
ENGLISH
•PEG PEREGO® thanks you for choosing this product. For over 50 years, PEG PEREGO has been taking children for an outing: first with its famous baby carriages and strollers, later with its pedal and battery operated toy vehicles.
•Read this instruction manual carefully to learn the use of this vehicle and to teach your child safe and enjoyable driving. Please keep this manual for use as a reference in the future.
•Our toys conform with the safety requirements provided by the Council of the EEC, of the T.Ü.V.; of the I.I.S.G. Istituto Italiano Sicurezza Giocattoli, and the U.S. Consumer Toy Safety Specification F963.
Peg Perego S.p.A. is an ISO 9001 certified company.
The fact that we are certified provides a guarantee of our honesty for our customers, and fosters trust in the company’s way of working.
•Peg Perego reserves the right to modify or change their product. Price, literature, manufacturing processes or locations or any combination of these above mentioned entities may change at any time for any reason without notice with impunity.
Years 3-8
CUSTOMER SERVICE
PEG PEREGO offers after-sales services, directly or with a network of authorized service centers for repairs or replacement parts. See the back cover of this instruction manual for a list of service centers.
Peg Perego is at the consumer's service, meeting every need in the best way possible. This is why our customers' opinions are so important and valuable to us. We would be very grateful if you would kindly fill in the CUSTOMER SATISFACTION QUESTIONNAIRE after using one of our products. You will find the questionnaire on the Internet at "www.pegperego.com/SSCo.html.en-UK".
Please note any observations or suggestions you may have on the questionnaire.
ASSEMBLY INSTRUCTIONS
ADULT ASSEMBLY REQUIRED.
USE CARE WHEN UNPACKING AS COMPONENTS TO BE ASSEMBLED MAY POSE A SMALL PARTS/SHARP EDGE HAZARD.
BATTERY ALREADY INSTALLED IN VEHICLE.
ASSEMBLY
1 • Position the double seat. To secure the double seat, rotate the red lock 180° using a screwdriver.
2 • Using a screwdriver and the spanner (supplied), secure the double seat in the front (under the rear mudquards).
3 • Position the roll-bar. Tighten the four screws to fix the seat.
4 • Attach the two lights above the roll-bar.
5 • Assemble the two parts of the steering wheel.
6 • Insert the steering wheel on the steering wheel column.
7 • Align steering wheel column holes with steering wheel: nut fits into haxagon hole, bolt into round hole.
8 • Loosen the safety screw that holds the hood shut.
9 • To install the windscreen, slide the trigger in the direction shown to release the hood. Move the hood forward.
10 • Insert the windscreen.
11 • Tighten the four screws to fix it.
12 • Press the rearview mirrors in place. The rearview mirrors can be swivelled in different positions.
13 • Position the rear lights, pushing them till they click.
14 • Attach the top part of the front bumper to the body of the vehicle.
15 • Fix the bumper with the two screws provided. 16 • Open the hood.
17 • Plug the battery into the vehicle’s electrical system.
ATTENTION: Always fasten the hood when finished. The vehicle is ready for use.
VEHICLE FEATURES AND INSTRUCTIONS FOR USE
18 • A: electric accelerator/brake pedal. Lifting your foot off the pedal, the brake applies automatically.
B: gearshift lever.
19 • GEAR SHIFT LEVERS: 1: first speed. 2: second speed. R: reverse.
20 • SECOND SPEED: When the red lock-out is positioned as shown in the figure, the vehicle will run in first speed and reverse only. The turtle on the lock-out is in the up position. To use the second gear, follow the instructions: loose the screw on the red lock-out.
21 • Remove the red lock-out.
22 • Rotate it 180° until the hare is in the up position. Insert the lock-out into the hole provided.
23 • Tighten the screw. By pushing the gearshift lever backward, the vehicle moves into second gear.
REPLACING THE BATTERY
24 • Open the hood. Remove the battery clamp.
25 • Replace the battery. Reposition the battery holder and close the hood.
BATTERY RECHARGE
WARNING: BATTERY CHARGING AND EVERY OTHER OPERATION ON THE ELECTRICAL SYSTEM MUST BE CARRIED OUT BY ADULTS ONLY.
THE BATTERY CAN ALSO BE CHARGED WITHOUT REMOVING IT FROM THE TOY.
26 • Unplug vehicle wiring terminal A from battery terminal B, by pressing terminals on side and pulling apart.
27 • Plug the battery charger terminal to a wall outlet following the instructions enclosed. Connect the plug B to the battery charger plug C.
28 • Once the charge is completed unplug recharger from wall outlet. Unplug recharger cord terminal C from battery terminal B.
29 • Insert plug B into plug A, pressing all the way until it clicks into place. Always remember to close the hood and tighten the screw.
BATTERY MAINTENANCE AND SAFETY
Before riding, charge your batteries for 18 hours to initiate them. Failure to do this will result in permanent battery damage.
CAUTION
Rechargeable batteries are only to be charged under adult supervision.
Never allow children to handle batteries.
CHARGE BATTERY
•Charge the batteries no longer than 24 hours, following the instructions enclosed with the battery charger.
•Charge the battery, as the vehicle shows low power, in this way you will avoid damage to the battery.
•If you don’t use your vehicle for a long period of time unplug the battery from the main wire harness of the vehicle. Remember to charge the battery at least every three months.
•Never charge the battery upside down.
•Do not forget batteries during charging! Check them periodically.
•Never use a replacement recharger or batteries unless they are approved by PEG PEREGO.
•Do not mix old and new batteries.
•Batteries are sealed and maintenance free.
•Battery polarity must be observed when connecting battery to wiring.
WARNING
•BATTERIES CONTAIN TOXIC AND CORROSIVE SUBSTANCES. DO NOT TAMPER WITH THEM.
•Batteries contain an acid-based electrolyte.
•Do not make direct contact between battery terminals, as this can cause an explosion or fire.
•Charging produces explosive gases. Charge batteries in a well ventilated area away from sources of heat and flammable materials.
•Exhausted batteries are to be removed from the vehicle.
•Do not place the batteries near clothing to avoid damage.
IF A LEAK DEVELOPS
Shield your eyes. Avoid direct contact with the electrolyte, protect your hands.
Place battery in a plastic bag and follow directions listed below.
