Blaupunkt RTM 127 operating instructions Programming with DSC Setup, DSC menu Setup

Page 26

Programming with DSC – Setup

DSC menu – Setup

(basic equipment settings)

• Press / to select “Setup”.

Learn card

This menu will not appear unless a KeyCard or the Master SIM card has been inserted. You can train a second KeyCard or up to 30 SIM cards.

Refer to the information in the section on “KeyCards and SIM cards – Training Key- Cards/SIM cards”.

It is not possible to clear the card inserted in the set.

Learn mode

With this function you can determine wheth- er additional cards can be programmed us- ing the DSC menu only or each time the cur- rently valid KeyCard or the Master SIM card has been removed as well.

• Press OK.

A maximum of four menu items will appear in the display. Press / to select the menu item you wish to alter.

Language

KeyCard LED

Beep

Keytones

Vario Colour

Brightness

Angle

Ignit. timer

Change code

User mode

Reset

Card list

It is possible to display a list containing all of the valid SIM cards. You can delete indi- vidual entries if you wish. You must use a KeyCard to delete the Master SIM card.

WARNING!

If an entry is deleted, it is no longer possible to operate the equipment using the corre- sponding card.

After pressing OK you must enter the ac- cess code. The entries can be viewed by pressing /.

After OK ”Change name”, “Clear” will ap- pear in the display.

Press / to choose between Clear and Change name.

Press CL to cancel the process, press OK to confirm the process.

If you want to enter/change names, please refer to ”Telephone book menu – Add en- try”.

MENU –

Cards can only be programmed with the help of the DSC menu.

MENU PLUS –

Additional simple method of programming cards:

Remove the KeyCard or Master SIM card and insert another card within 15 seconds. This programming process can be repeat- ed with other cards.

Language

The display texts are available in several dif- ferent languages.

If “AUTOMATIC” has been selected, Eng- lish will be the language used for the dis- play texts when the KeyCard has been in- serted.

If a SIM card is used, the language select- ed on the card will be the language which appears in the display as long as it is avail- able in the unit.

92

Image 26

Contents Helsinki RTM PAC Contents Radio, CD changer optional Contents Radio, CD changer optional Contents Telephone Contents Telephone Important information Safety standardsSafety information General informationImportant information InstallationUsing the telephone in critical areas Emergency callsAccessories Starting up the Radiophone KeyCard and SIM cardBasic information Train KeyCard/SIM cards KeyCard and SIM cardRemove the KeyCard/SIM card Displaying the radio pass data DSC learn modeOptical warning of anti-theft protection Switch the unit on/off via the ignition On/off VolumeSwitch the unit on/off with the Key- Card Operation in combination with an ignition timerTS / BND Alter the volumeSRC Source AF / # Selection buttons Radio mode Enter the frequency directlyStore radio stations MIX= Display Flashing card tongue? Rocker switch PlayedSelect operating mode Audio modeAF Alternative Frequency Station tuningRadio operation with RDS Radio Data System REG regional programEnter the frequency directly Manual tuning withRadio operation with RDS Radio Data System Scroll through the broadcasting networks FM onlyAlter search sensitivity Switch from stereo to mono FM onlyRecall stored radio stations Radiotext Switch traffic announcement priority on/offTraffic program station reception with RDS-EON Beep toneCD changer operation optional Switch CD changer operation onSwitch off the warning beep Automatic search startClear CD name CD changer operation optionalEnter CD names ClearProgramming with DSC PaX PAC memoryProgramming with DSC Setup DSC menu SetupUser mode Ignition timerReset KeyCard LEDProgramming with DSC Radio Overview of the DSC default set- tings SetupTA volume DSC Menu RadioSensitivity Overview of the DSC default settings RadioSave settings / end DSC programming Music/SpeechPage Telephone operation PIN code Telephone operationGeneral information Insert the SIM card/enter your PIN codeGSM emergency calls Telephone operationMake your first telephone call Quick telephone reference MIX Quick telephone referenceAF / # ? Rocker switch @ MEQuick telephone reference Using the telephone GSM network service areaUsing the telephone Dial a telephone numberCall waiting 2nd caller Answer/end a callRedial function Broker’s call/hold Conference callsInternational calls PaX PAC memorySelect the function Make telephone calls using the handset accessoryProgramming with DSC SelectPhone book menu How to enter a name/textProgramming with DSC Phone book Capital and small letters Find an entry by nameEnter letters/characters Move the cursor in the input text boxSelect an entry by remote Find an entry by positionEntry ControlAdd entry Access CapacityHandset volume VolumeHands-free volume Show my phone numberRinging tone Automatic answerAutomatic redial My numberAOC parameters Advice of Charge Audible call timerExternal alarm PIN-codeTA Traffic Announcement Overview of the factory defaultSettings in the Setup menu During a telephone callCall mailbox Programming with DSC Call MenuCall menu SMS messagesBroadcast Search method Network selectionParameters Available networksCall meters Preferred networksCall forwarding Enter data for call forwardingPractical example of call forwarding Call barring Enter data for call barring Phone lockUser group Telephone SpecificationsAmplifier TunerGlossary Glossary Speed-dial User groupIndex Index Selecting a CD Selecting a track Bosch Gruppe