Blaupunkt RTM 127 KeyCard and SIM card, Basic information, Starting up the Radiophone

Page 10

KeyCard and SIM card

KeyCard

Basic information

One KeyCard is included with the Radio- phone.

The car radio can also be operated with a second ”trained”KeyCard or with one of up to 30 “trainable”SIM cards.

Using the KeyCard it is possible to activate the following operating modes:

Radio, CD changer (optional), AUX, tele- phone emergency call.

Using the SIM card it is possible to activate all operating modes. You can use either reg- ular SIM cards or miniature SIM cards with an adapter card.

The SIM card is equipped with the same anti-theft functions as the KeyCard.

If necessary (in the event of loss or dam- age), it is possible to purchase a KeyCard or SIM card from an authorised dealer.

Second KeyCard/SIM card

If you use a second KeyCard or SIM card, this card will copy the settings programmed on the original card.

It is also possible to store the following func- tions individually:

Station preset buttons, bass, treble, balance and fader settings, Loudness, TA (traffic an- nouncement volume), VOLUME FIX.

For two KeyCards and the first two SIM cards, the settings programmed last such as waveband, bass/treble, fader/balance, radio station, station preset buttons, VOL- UME FIX will remain stored.

When you insert your KeyCard or one of the first two SIM cards, you will find that the equipment switches onto the basic settings you have already programmed.

Invalid KeyCards

If you insert a KeyCard which does not be- long to this equipment into the unit, ”KEY- CARD ERROR” will appear in the display. Do not attempt to operate the equipment.

The unit will switch off after about 8 sec- onds.

If an invalid card is inserted four times, there will be a waiting period of one hour.

If you should insert a different type of card (e.g. a telephone card or credit card),

”CHECK KEYCARD”will appear for approx. 2 seconds in the display.

Remove the wrong card and replace it with a valid KeyCard or SIM card.

Starting up the Radiophone

• Switch the unit on (press 1).

With the Card tongue protruding out of the unit, insert the KeyCard included with the Radiophone into the slot with the contact surface facing up. The Radiophone is now ready for operation.

Do not try to insert the KeyCard when the tongue is retracted as this may damage the KeyCard mecha- nism.

Using the Radiophone after the power has been disconnected

If the Radiophone is disconnected from the battery for any reason (e.g. during car re- pair work) and re-connected again, it will be necessary to use a trained KeyCard or the Master SIM card to restart and reactivate the other trained SIM cards.

76

Image 10
Contents Helsinki RTM PAC Contents Radio, CD changer optional Contents Radio, CD changer optional Contents Telephone Contents Telephone Important information Safety standardsSafety information General informationImportant information InstallationUsing the telephone in critical areas Emergency callsAccessories Basic information KeyCard and SIM cardStarting up the Radiophone Remove the KeyCard/SIM card KeyCard and SIM cardTrain KeyCard/SIM cards Optical warning of anti-theft protection DSC learn modeDisplaying the radio pass data Switch the unit on/off via the ignition On/off VolumeSwitch the unit on/off with the Key- Card Operation in combination with an ignition timerSRC Source Alter the volumeTS / BND AF / # Selection buttons Radio mode Enter the frequency directlyStore radio stations MIX= Display Flashing card tongue? Rocker switch PlayedSelect operating mode Audio modeAF Alternative Frequency Station tuningRadio operation with RDS Radio Data System REG regional programEnter the frequency directly Manual tuning withRadio operation with RDS Radio Data System Scroll through the broadcasting networks FM onlyRecall stored radio stations Switch from stereo to mono FM onlyAlter search sensitivity Radiotext Switch traffic announcement priority on/offTraffic program station reception with RDS-EON Beep toneCD changer operation optional Switch CD changer operation onSwitch off the warning beep Automatic search startClear CD name CD changer operation optionalEnter CD names ClearProgramming with DSC PaX PAC memoryProgramming with DSC Setup DSC menu SetupUser mode Ignition timerReset KeyCard LEDProgramming with DSC Radio Overview of the DSC default set- tings SetupTA volume DSC Menu RadioSensitivity Overview of the DSC default settings RadioSave settings / end DSC programming Music/SpeechPage Telephone operation PIN code Telephone operationGeneral information Insert the SIM card/enter your PIN codeMake your first telephone call Telephone operationGSM emergency calls Quick telephone reference AF / # Quick telephone referenceMIX ? Rocker switch @ MEQuick telephone reference Using the telephone GSM network service areaUsing the telephone Dial a telephone numberRedial function Answer/end a callCall waiting 2nd caller Broker’s call/hold Conference callsInternational calls PaX PAC memorySelect the function Make telephone calls using the handset accessoryProgramming with DSC SelectProgramming with DSC Phone book How to enter a name/textPhone book menu Capital and small letters Find an entry by nameEnter letters/characters Move the cursor in the input text boxSelect an entry by remote Find an entry by positionEntry ControlAdd entry Access CapacityHandset volume VolumeHands-free volume Show my phone numberRinging tone Automatic answerAutomatic redial My numberAOC parameters Advice of Charge Audible call timerExternal alarm PIN-codeTA Traffic Announcement Overview of the factory defaultSettings in the Setup menu During a telephone callCall mailbox Programming with DSC Call MenuCall menu SMS messagesBroadcast Search method Network selectionParameters Available networksCall meters Preferred networksCall forwarding Enter data for call forwardingPractical example of call forwarding Call barring User group Phone lockEnter data for call barring Telephone SpecificationsAmplifier TunerGlossary Glossary Speed-dial User groupIndex Index Selecting a CD Selecting a track Bosch Gruppe