Blaupunkt RTM 127 Sensitivity, Music/Speech, Read KeyCard, Save settings / end DSC programming

Page 29

Programming with DSC – Radio

	VOLUME FIX	Using the KeyCard included with the deliv-
	Allows you to set the volume at which the	ery, it is possible to display the equipment
		data such as name, type number (76 ...) and
	unit switches on.
		serial number.
	Use << / >> to set the desired volume. If
		If you remove the KeyCard while it is being
	”Last Volume”is selected, the car radio will
		read, ”CHANGE CARD” will appear in the
	switch on at the volume level which was last
		display. You can read out the data on any
	set before it was switched off. “Last Volume”
		number of other KeyCards, including those
	can be activated after “Level +01".	belonging to other equipment. You can no

	Sensitivity	longer operate the system except to switch
	You can adjust the search sensitivity to three	it off.
		As soon as you have inserted a KeyCard
	different levels: high, mid-range, low.	belonging to this unit once again, you can
	Press << / >> to alter the setting.	press OK to return to the radio mode.
	DX: for distant reception
	LO: for local reception	Music/Speech
	AUXILIARY SOURCE	In future, different RDS radio stations will
	This menu item will not appear if a CD	differentiate between music and speech pro-
		grams.
	changer has been connected to the system.	The tone setting for speech programs rang-
	The default setting is ”OFF”.	es between ”LEVEL 1 ... 4”.
	If an external piece of equipment is connect-	Off	– Music/speech is switched off.
	ed to the system, this setting must be
		LEVEL 1	– Linear (no bass, treble, loud-
	switched to ”ON”.
			ness adjustment)

	Read KeyCard	LEVEL 2-4 – Different settings for volume,
			bass and treble with loud-

	This menu item will appear only if a Key-		ness switched off.
	Card is inserted.	Test the settings to find out which one you
	It is possible to read out the data on a Key-	prefer.

Card.

Save settings / end DSC programming:

•Press DSC/OK and CL one after the other.

Overview of the DSC default settings (Radio)

Radiotext	Off
Loudness	LEVEL 3
TA Volume	LEVEL +30
Volume FIX	LEVEL +20
Sensitivity	DX: High
	LO: High
Aux	Off
Music/Speech	Off

RadioDEUTSCH

ENGLSHTelefon

TelephoneRadio

95

Image 29

Contents Helsinki RTM PAC Contents Radio, CD changer optional Contents Radio, CD changer optional Contents Telephone Contents Telephone Safety information Safety standardsImportant information General informationUsing the telephone in critical areas InstallationImportant information Emergency callsAccessories Starting up the Radiophone KeyCard and SIM cardBasic information Train KeyCard/SIM cards KeyCard and SIM cardRemove the KeyCard/SIM card Displaying the radio pass data DSC learn modeOptical warning of anti-theft protection Switch the unit on/off with the Key- Card On/off VolumeSwitch the unit on/off via the ignition Operation in combination with an ignition timerTS / BND Alter the volumeSRC Source Store radio stations Selection buttons Radio mode Enter the frequency directlyAF / # MIXFlashing card tongue = DisplayPlayed ? Rocker switchAudio mode Select operating modeRadio operation with RDS Radio Data System Station tuningAF Alternative Frequency REG regional programRadio operation with RDS Radio Data System Manual tuning withEnter the frequency directly Scroll through the broadcasting networks FM onlyAlter search sensitivity Switch from stereo to mono FM onlyRecall stored radio stations Traffic program station reception with RDS-EON Switch traffic announcement priority on/offRadiotext Beep toneSwitch off the warning beep Switch CD changer operation onCD changer operation optional Automatic search startEnter CD names CD changer operation optionalClear CD name ClearPaX PAC memory Programming with DSC DSC menu Setup Programming with DSC SetupReset Ignition timerUser mode KeyCard LEDTA volume Overview of the DSC default set- tings SetupProgramming with DSC Radio DSC Menu RadioSave settings / end DSC programming Overview of the DSC default settings RadioSensitivity Music/SpeechPage Telephone operation General information Telephone operationPIN code Insert the SIM card/enter your PIN codeGSM emergency calls Telephone operationMake your first telephone call Quick telephone reference MIX Quick telephone referenceAF / # @ ME ? Rocker switchQuick telephone reference GSM network service area Using the telephoneDial a telephone number Using the telephoneCall waiting 2nd caller Answer/end a callRedial function Conference calls Broker’s call/holdPaX PAC memory International callsProgramming with DSC Make telephone calls using the handset accessorySelect the function SelectPhone book menu How to enter a name/textProgramming with DSC Phone book Enter letters/characters Find an entry by nameCapital and small letters Move the cursor in the input text boxEntry Find an entry by positionSelect an entry by remote ControlCapacity Add entry AccessHands-free volume VolumeHandset volume Show my phone numberAutomatic redial Automatic answerRinging tone My numberAudible call timer AOC parameters Advice of ChargePIN-code External alarmSettings in the Setup menu Overview of the factory defaultTA Traffic Announcement During a telephone callCall menu Programming with DSC Call MenuCall mailbox SMS messagesBroadcast Parameters Network selectionSearch method Available networksPreferred networks Call metersEnter data for call forwarding Call forwardingPractical example of call forwarding Call barring Enter data for call barring Phone lockUser group Amplifier SpecificationsTelephone TunerGlossary Glossary User group Speed-dialIndex Index Selecting a CD Selecting a track Bosch Gruppe