Blaupunkt TCM 169 Using the telephone, GSM network service area, Switching to telephone mode

Page 37

Using the telephone

All of the telephone functions can be oper- ated using a trained SIM card.

•With the card tongue protruding, insert the trained SIM card into the slot with the contact surface facing up.

•Switch the unit on.

If you have not yet trained any SIM cards, refer to the section on “Train or delete Key- Card/SIM card”.

GSM network service area

To be able to use the telephone, you must be located in an area served by the GSM network. As soon as a network signal is re- ceived, the symbol indicating the signal

strength and an antenna symbol will appear in the display. If the signal is not strong enough your call may be disconnect- ed. If the antenna symbol is flashing, it is possible to make emergency calls only. If the antenna is displayed on a dark back- ground, you are located in an area serviced by a roaming network (may be subject to additional charges).

Switching to telephone mode

It is possible to switch to the telephone mode from any of the audio modes.

•Press .

The display will indicate the network and the network operator if a network signal is re- ceived. The antenna symbol will not flash.

Save telephone numbers and names

You can save up to 25 telephone numbers and names (entries) in the telephone mem- ory bank.

The number of entries you can save on the SIM card depends on the type of card you use.

If you would like to save an entry, press the following keys one after the other:

•Press ME on the set for approx. 1 sec- ond.

•Press / to choose the entry posi- tion, for example:

“SIM card” or “Phone” and press OK.

•Enter the new telephone number and press OK.

•Use the selection buttons to enter the name. If necessary, refer to the section on “How to enter a name/text”. Press OK to confirm your entry.

•Enter the entry position and press OK. If you do not enter a position, the entry will be stored at the next available position.

If there is a number already stored at the position entered, “Overwrite ?” will appear in the display.

Press OK to overwrite the entry (the previ- ous entry will be deleted).

Add the next entry:

•Press OK.

RadioDEUTSCH

ENGLISHTelefon

TelephoneRadio

101

Image 37

Contents Monte Carlo TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Safety information Safety standardsImportant information General informationUsing the telephone in critical areas Using the telephone while drivingImportant information Emergency callsAccessories InstallationInternational telephone informa- tion GuaranteeBasic information KeyCard and SIM cardStarting up the Radiophone KeyCard and SIM card Training or replace KeyCard/ SIM card using DSCRemoving the KeyCard/SIM card Train KeyCard/SIM cardsDisplaying the radio pass data DSC learn modeOptical warning of anti-theft protection Care of your KeyCard/SIM cardSwitching the unit on/off with the KeyCard On/off VolumeSwitching the unit on/off via the ig- nition Switching the radio on when the ig- nition is switched offSRC Source Track switchTS / BND Eject cassetteStoring radio stations Cassette loading slotRecalling stored radio stations -Se AF / #Display = MIXRadio operation a Cassette operation Changer operation optionalFlashing card tongue Tape operationStop this function by pressing or the opposite button Additional settings possible with AUD Additional rocker switch functionsDSC mode C ME Unit Corresponding function must be activatedAF Alternative Frequency Audio modeREG regional programme Radio, tape deck, CD changer optional, auxiliary sourceRadio operation with RDS Radio Data System Station tuningEntering the frequency directly Selecting a wavebandStoring radio stations Scrolling through the broadcast- ing networks FM onlySwitching from stereo to mono FM only Selecting the seek-tuning sensi- tivityRecalling stored radio stations Automatic seek tuning start Switching traffic announcement priority on/offSwitching off the beep tone Traffic programme station reception with RDS-EONOperating the cassette deck Tape equalisation Operating the cassette deckDolby B NR Care instructionsCD changer operation optional Switching CD changer operation onSelecting the CD and the track Select CancelAlter StoreProgramming with DSC Radio, Cassette, Changer optional = ignition timer switched offCards can only be programmed with the help of the DSC menu Music/voice is switched offOn All of the menu items are available End DSC programming/save changes You can choose among the following oper- ating modesOverview of the DSC default settings Telephone operation PIN code Operating the telephoneInserting the SIM card/ entering your PIN code Reactivating the SIM cardMaking your first telephone call Operating the telephoneGSM emergency calls Do not hang up until you are told to do soVolume Quick reference for using the telephoneOn/Off Selection buttonsTo switch back to the telephone mode Press briefly Enter PIN code Setup menu/Call menuDisplays Radio menu Telephone-book menu@ Rocker switch GSM network service area Using the telephoneSwitching to telephone mode Save telephone numbers and namesDialling a telephone number Using the telephoneAnswering/ending a call Redial functionAutomatic Save telephone numbers from the note- padBroker’s call/hold Call waiting 2nd callerSetting up a conference call Making telephone calls using the handset special accessoryConference calls International callsHow to receive calls How to place telephone calls in foreign countriesTeleph. number Blaupunkt You enter +49512149 Tip107 Phone book menuPhone book menu How to enter a name/textFinding an entry by name Show my phone number Prevent accessCheck capacity Finding an entry by position Add entryAltering, deleting, moving or copying the entry Programming with DSC Telephone Press CL, the altered setting will not be storedStore/confirm End DSCProgramming in the setup menu Programming with DSC Telephone -Setup menuSelect the setup menu by pressing 113Hands-free volume Ringing tone volume Automatic answer Operating modeHandset volume Automatic redialCall meter format SMS toneSet charge parameters Audible call timerPIN code EnteredFollowing settings will be deleted Alter access codeExternal alarm Be sure to make a note of the new code if you change itExtended menu Ring signal Overview of the basic factory settings in the set-up menuHands-free channel TA during call Hands-free operation is possible on all four channelsProgramming with DSC Telephone -Call menu Press CL, the new setting will not be storedProgramming in the Call Menu 119Selecting the message Call mailbox Received SMS messagesReading messages Press OK You can display the message by press- ingSending SMS messages Calling the sender or another telephoneSender Network selection Cell Broadcast Call forwarding Call metersCall barring Fixed dial numbers Phone lockClosed user group Overview of the basic factory settings in the call menuGlossary Amplifier SpecificationsTuner TelephoneIndex Index 042 175 873 Service numbersBosch Gruppe