Blaupunkt TCM 169 Ringing tone volume Automatic answer Operating mode, Hands-free volume

Page 50

Programming with DSC Telephone –Setup menu

Ringing tone volume

Automatic answer

Operating mode

Press << / >> to adjust the volume of the ringing tone from between 0 and 9. 0 = off.

If the automatic answer function is switched on, the volume cannot be set to “0”.

Hands-free volume

The telephone will automatically answer in- coming calls if you press << / >> to select “On” for this menu item.

The call will be set to hands-free operation automatically.

In this case, do not set the ringing tone vol- ume to “0”.

Automatic redial

If this menu item is selected, you will be re- quired to enter the access code after press- ing OK.

Then select the operating mode by press- ing << / >>:

Standard	–	all operating modes
Radio only	– no telephone, all other
		operating modes
Phone only	–	telephone mode only

Press << / >> to adjust the volume of the incoming call from 0 to 63 over the car speakers.

Handset volume

This menu item will not appear unless a Blaupunkt handset has been connected to the system.

Press << / >> to adjust the volume of the handset to one of three levels (low, medi- um, high), remove the handset from the cra- dle first.

If the busy signal is received, an outgoing call will be redialled automatically if you press << / >> to select “On” for this menu item.

You can stop the automatic redial by press- ing the telephone button.

Off – redial is switched off

On – redial is switched on.

The number of times the telephone will at- tempt to redial depends on the network used.

Extended menu

Use this function to remove the following menu items from the display in the setup menu by pressing << / >>. These items are seldom used.

This makes the setup menu more clear.

Off – menu items removed from display

On – all of the menu items are available.

114

Image 50

Contents Monte Carlo TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Important information Safety standardsSafety information General informationImportant information Using the telephone while drivingUsing the telephone in critical areas Emergency callsInstallation AccessoriesGuarantee International telephone informa- tionStarting up the Radiophone KeyCard and SIM cardBasic information Removing the KeyCard/SIM card Training or replace KeyCard/ SIM card using DSCKeyCard and SIM card Train KeyCard/SIM cardsOptical warning of anti-theft protection DSC learn modeDisplaying the radio pass data Care of your KeyCard/SIM cardSwitching the unit on/off via the ig- nition On/off VolumeSwitching the unit on/off with the KeyCard Switching the radio on when the ig- nition is switched offTS / BND Track switchSRC Source Eject cassetteRecalling stored radio stations -Se Cassette loading slotStoring radio stations AF / #Radio operation a = MIXDisplay Cassette operation Changer operation optionalStop this function by pressing or the opposite button Tape operationFlashing card tongue DSC mode C ME Unit Additional rocker switch functionsAdditional settings possible with AUD Corresponding function must be activatedREG regional programme Audio modeAF Alternative Frequency Radio, tape deck, CD changer optional, auxiliary sourceEntering the frequency directly Station tuningRadio operation with RDS Radio Data System Selecting a wavebandScrolling through the broadcast- ing networks FM only Storing radio stationsRecalling stored radio stations Selecting the seek-tuning sensi- tivitySwitching from stereo to mono FM only Switching off the beep tone Switching traffic announcement priority on/offAutomatic seek tuning start Traffic programme station reception with RDS-EONOperating the cassette deck Dolby B NR Operating the cassette deckTape equalisation Care instructionsSelecting the CD and the track Switching CD changer operation onCD changer operation optional Alter CancelSelect Store= ignition timer switched off Programming with DSC Radio, Cassette, Changer optionalOn All of the menu items are available Music/voice is switched offCards can only be programmed with the help of the DSC menu You can choose among the following oper- ating modes End DSC programming/save changesOverview of the DSC default settings Telephone operation Inserting the SIM card/ entering your PIN code Operating the telephonePIN code Reactivating the SIM cardGSM emergency calls Operating the telephoneMaking your first telephone call Do not hang up until you are told to do soOn/Off Quick reference for using the telephoneVolume Selection buttonsDisplays Radio menu Enter PIN code Setup menu/Call menuTo switch back to the telephone mode Press briefly Telephone-book menu@ Rocker switch Switching to telephone mode Using the telephoneGSM network service area Save telephone numbers and namesUsing the telephone Dialling a telephone numberAutomatic Redial functionAnswering/ending a call Save telephone numbers from the note- padCall waiting 2nd caller Broker’s call/holdConference calls Making telephone calls using the handset special accessorySetting up a conference call International callsTeleph. number Blaupunkt You enter +49512149 How to place telephone calls in foreign countriesHow to receive calls TipPhone book menu 107How to enter a name/text Phone book menuFinding an entry by name Check capacity Prevent accessShow my phone number Altering, deleting, moving or copying the entry Add entryFinding an entry by position Store/confirm Press CL, the altered setting will not be storedProgramming with DSC Telephone End DSCSelect the setup menu by pressing Programming with DSC Telephone -Setup menuProgramming in the setup menu 113Handset volume Ringing tone volume Automatic answer Operating modeHands-free volume Automatic redialSMS tone Call meter formatPIN code Audible call timerSet charge parameters EnteredExternal alarm Alter access codeFollowing settings will be deleted Be sure to make a note of the new code if you change itHands-free channel TA during call Overview of the basic factory settings in the set-up menuExtended menu Ring signal Hands-free operation is possible on all four channelsProgramming in the Call Menu Press CL, the new setting will not be storedProgramming with DSC Telephone -Call menu 119Reading messages Call mailbox Received SMS messagesSelecting the message Press OK You can display the message by press- ingSender Calling the sender or another telephoneSending SMS messages Network selection Cell Broadcast Call barring Call metersCall forwarding Phone lock Fixed dial numbersOverview of the basic factory settings in the call menu Closed user groupGlossary Tuner SpecificationsAmplifier TelephoneIndex Index Bosch Gruppe Service numbers042 175 873