Blaupunkt TCM 169 Calling the sender or another telephone, Sending SMS messages, Sender

Page 57

Programming with DSC Telephone –Call menu

Calling the sender or another telephone

If you would like to call whoever sent the message,

press while the message is on dis- play.

The telephone will automatically call the corresponding number. If the message con- tains a telephone number in “quotation marks”, the call will be made to that number. If there are several different telephone num- bers in quotation marks, the call will be made to the first one.

Sending SMS messages

Using this menu item you can send mes- sages to other subscribers and set the cor- responding parameters.

Press / to select “Send SMS mes- sage” and press OK.

“SMS parameters”

Press / to select the desired func- tion and press OK.

“Valid”:

Here you can determine how long the network operator should continue try- ing to send the message. The default setting is 1 day. Use the numbers keys to select from 1 to 7.

After making your selection

• press OK.

“Service no.”:

The message is sent to a service number provided by the network oper- ator and forwarded from there to the recipient. Contact your network opera- tor to receive the service number and enter it here.

Service no.:

“New SMS message”

Press OK, “Enter text” will appear in the display.

You can now enter a text of up to 160 characters. If necessary, please refer to the section on “How to enter a name/text”.

Press OK after you have entered the text.

“Call number” will appear in the dis- play.

Enter the recipient’s telephone number and press OK.

“Store?” will appear in the display.

Press / to select “Send?”, “De- lete?” or “Store?” and press OK.

Sending “Stored SMS messages”

• Press / to select the desired func-

tion and press OK.

“My short messages”

The beginning of the message will ap-

RadioDEUTSCH

ENGLISHTelefon

Radio

Press / to select the desired func- tion and press OK.

pear In the first line of the display, the

telephone number of the recipient in

the second line.

“Received messages”

The display will indicate the date, time

and sender.

Telephone

121

Image 57
Contents Monte Carlo TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Safety information Safety standardsImportant information General informationUsing the telephone in critical areas Using the telephone while drivingImportant information Emergency callsAccessories InstallationInternational telephone informa- tion GuaranteeKeyCard and SIM card Basic informationStarting up the Radiophone KeyCard and SIM card Training or replace KeyCard/ SIM card using DSCRemoving the KeyCard/SIM card Train KeyCard/SIM cardsDisplaying the radio pass data DSC learn modeOptical warning of anti-theft protection Care of your KeyCard/SIM cardSwitching the unit on/off with the KeyCard On/off VolumeSwitching the unit on/off via the ig- nition Switching the radio on when the ig- nition is switched offSRC Source Track switchTS / BND Eject cassetteStoring radio stations Cassette loading slotRecalling stored radio stations -Se AF / #Display = MIXRadio operation a Cassette operation Changer operation optionalTape operation Flashing card tongueStop this function by pressing or the opposite button Additional settings possible with AUD Additional rocker switch functionsDSC mode C ME Unit Corresponding function must be activatedAF Alternative Frequency Audio modeREG regional programme Radio, tape deck, CD changer optional, auxiliary sourceRadio operation with RDS Radio Data System Station tuningEntering the frequency directly Selecting a wavebandStoring radio stations Scrolling through the broadcast- ing networks FM onlySelecting the seek-tuning sensi- tivity Switching from stereo to mono FM onlyRecalling stored radio stations Automatic seek tuning start Switching traffic announcement priority on/offSwitching off the beep tone Traffic programme station reception with RDS-EONOperating the cassette deck Tape equalisation Operating the cassette deckDolby B NR Care instructionsSwitching CD changer operation on CD changer operation optionalSelecting the CD and the track Select CancelAlter StoreProgramming with DSC Radio, Cassette, Changer optional = ignition timer switched offMusic/voice is switched off Cards can only be programmed with the help of the DSC menuOn All of the menu items are available End DSC programming/save changes You can choose among the following oper- ating modesOverview of the DSC default settings Telephone operation PIN code Operating the telephoneInserting the SIM card/ entering your PIN code Reactivating the SIM cardMaking your first telephone call Operating the telephoneGSM emergency calls Do not hang up until you are told to do soVolume Quick reference for using the telephoneOn/Off Selection buttonsTo switch back to the telephone mode Press briefly Enter PIN code Setup menu/Call menuDisplays Radio menu Telephone-book menu@ Rocker switch GSM network service area Using the telephoneSwitching to telephone mode Save telephone numbers and namesDialling a telephone number Using the telephoneAnswering/ending a call Redial functionAutomatic Save telephone numbers from the note- padBroker’s call/hold Call waiting 2nd callerSetting up a conference call Making telephone calls using the handset special accessoryConference calls International callsHow to receive calls How to place telephone calls in foreign countriesTeleph. number Blaupunkt You enter +49512149 Tip107 Phone book menuPhone book menu How to enter a name/textFinding an entry by name Prevent access Show my phone numberCheck capacity Add entry Finding an entry by positionAltering, deleting, moving or copying the entry Programming with DSC Telephone Press CL, the altered setting will not be storedStore/confirm End DSCProgramming in the setup menu Programming with DSC Telephone -Setup menuSelect the setup menu by pressing 113Hands-free volume Ringing tone volume Automatic answer Operating modeHandset volume Automatic redialCall meter format SMS toneSet charge parameters Audible call timerPIN code EnteredFollowing settings will be deleted Alter access codeExternal alarm Be sure to make a note of the new code if you change itExtended menu Ring signal Overview of the basic factory settings in the set-up menuHands-free channel TA during call Hands-free operation is possible on all four channelsProgramming with DSC Telephone -Call menu Press CL, the new setting will not be storedProgramming in the Call Menu 119Selecting the message Call mailbox Received SMS messagesReading messages Press OK You can display the message by press- ingCalling the sender or another telephone Sending SMS messagesSender Network selection Cell Broadcast Call meters Call forwardingCall barring Fixed dial numbers Phone lockClosed user group Overview of the basic factory settings in the call menuGlossary Amplifier SpecificationsTuner TelephoneIndex Index Service numbers 042 175 873Bosch Gruppe