Blaupunkt TCM 169 KeyCard and SIM card, Basic information, Starting up the Radiophone

Page 9

KeyCard and SIM card

KeyCard

Basic information

One KeyCard is included with the Radio- phone.

The car radio can also be operated with a second “trained” KeyCard or with one of up to 30 trainable SIM cards.

Using the KeyCard it is possible to activate the following operating modes:

Radio, tape deck, CD changer (optional), AUX, telephone emergency call.

Using the SIM card it is possible to activate all operating modes.

The SIM card also incorporates the anti-theft functions.

If necessary (in the event of loss or dam- age), it is possible to purchase a KeyCard or SIM card from an authorised dealer.

Second KeyCard/SIM card

If you use a second KeyCard or a SIM card, the settings will be transferred from the first KeyCard.

The following personal settings will remain stored for two KeyCards and the first two SIM cards:

Station presets, treble, bass, balance and fader, Loudness on/off, TA (traffic an- nouncement volume), FIX volume.

The two KeyCards and the first two SIM cards will store the last setting selected for the waveband, bass/treble, fader/balance, station settings, station presets, FIX volume.

When you insert your KeyCard or one of the first two SIM cards, you will find that the equipment switches onto the basic settings you have already programmed.

Wrong KeyCard

If a KeyCard from another radio is inserted into the unit, “KEYCARD ERROR” will ap- pear in the display. Please do not try to op- erate the equipment.

After approx. 8 sec. the radio will switch off automatically.

If the wrong KeyCard is inserted four times, the waiting time will increase to one hour.

If you attempt to insert a different kind of card (e.g. telephone or credit card), “CHECK KEYCARD” or “PRÜFE KEYCARD” will ap- pear in the display for approx. 2 sec.

Remove the wrong card and replace it with a valid KeyCard or SIM card.

Starting up the Radiophone

•Switch the unit on (press 1).

Important!

The Card tongue must protrude - then insert the KeyCard included with the Radiophone into the slot with the con- tact surface facing up.

Do not try to insert the KeyCard when the tongue is retracted as this may damage the KeyCard mechanism.

The Radiophone is now ready for operation.

Resuming equipment operation after the power has been disconnected

If the Radiophone is disconnected from the battery (e.g. during repairs) and then recon- nected, a trained KeyCard or the master SIM card is required to resume equipment oper- ation and to reactivate the other trained SIM cards.

Selecting the language for the display

At the factory the texts for the display are set to English.

You can display the texts in other languag- es if you wish.

•Press DSC/OK.

•Press / until “LANGUAGE” appears in the display.

RadioDEUTSCH

ENGLISHTelefon

TelephoneRadio

73

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Monte Carlo TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Safety information Safety standardsImportant information General informationUsing the telephone in critical areas Using the telephone while drivingImportant information Emergency callsAccessories InstallationInternational telephone informa- tion GuaranteeKeyCard and SIM card Basic informationStarting up the Radiophone KeyCard and SIM card Training or replace KeyCard/ SIM card using DSCRemoving the KeyCard/SIM card Train KeyCard/SIM cardsDisplaying the radio pass data DSC learn modeOptical warning of anti-theft protection Care of your KeyCard/SIM cardSwitching the unit on/off with the KeyCard On/off VolumeSwitching the unit on/off via the ig- nition Switching the radio on when the ig- nition is switched offSRC Source Track switchTS / BND Eject cassetteStoring radio stations Cassette loading slotRecalling stored radio stations -Se AF / #Display = MIXRadio operation a Cassette operation Changer operation optionalTape operation Flashing card tongueStop this function by pressing or the opposite button Additional settings possible with AUD Additional rocker switch functionsDSC mode C ME Unit Corresponding function must be activatedAF Alternative Frequency Audio modeREG regional programme Radio, tape deck, CD changer optional, auxiliary sourceRadio operation with RDS Radio Data System Station tuningEntering the frequency directly Selecting a wavebandStoring radio stations Scrolling through the broadcast- ing networks FM onlySelecting the seek-tuning sensi- tivity Switching from stereo to mono FM onlyRecalling stored radio stations Automatic seek tuning start Switching traffic announcement priority on/offSwitching off the beep tone Traffic programme station reception with RDS-EONOperating the cassette deck Tape equalisation Operating the cassette deckDolby B NR Care instructionsSwitching CD changer operation on CD changer operation optionalSelecting the CD and the track Select CancelAlter StoreProgramming with DSC Radio, Cassette, Changer optional = ignition timer switched offMusic/voice is switched off Cards can only be programmed with the help of the DSC menuOn All of the menu items are available End DSC programming/save changes You can choose among the following oper- ating modesOverview of the DSC default settings Telephone operation PIN code Operating the telephoneInserting the SIM card/ entering your PIN code Reactivating the SIM cardMaking your first telephone call Operating the telephoneGSM emergency calls Do not hang up until you are told to do soVolume Quick reference for using the telephoneOn/Off Selection buttonsTo switch back to the telephone mode Press briefly Enter PIN code Setup menu/Call menuDisplays Radio menu Telephone-book menu@ Rocker switch GSM network service area Using the telephoneSwitching to telephone mode Save telephone numbers and namesDialling a telephone number Using the telephoneAnswering/ending a call Redial functionAutomatic Save telephone numbers from the note- padBroker’s call/hold Call waiting 2nd callerSetting up a conference call Making telephone calls using the handset special accessoryConference calls International callsHow to receive calls How to place telephone calls in foreign countriesTeleph. number Blaupunkt You enter +49512149 Tip107 Phone book menuPhone book menu How to enter a name/textFinding an entry by name Prevent access Show my phone numberCheck capacity Add entry Finding an entry by positionAltering, deleting, moving or copying the entry Programming with DSC Telephone Press CL, the altered setting will not be storedStore/confirm End DSCProgramming in the setup menu Programming with DSC Telephone -Setup menuSelect the setup menu by pressing 113Hands-free volume Ringing tone volume Automatic answer Operating modeHandset volume Automatic redialCall meter format SMS toneSet charge parameters Audible call timerPIN code EnteredFollowing settings will be deleted Alter access codeExternal alarm Be sure to make a note of the new code if you change itExtended menu Ring signal Overview of the basic factory settings in the set-up menuHands-free channel TA during call Hands-free operation is possible on all four channelsProgramming with DSC Telephone -Call menu Press CL, the new setting will not be storedProgramming in the Call Menu 119Selecting the message Call mailbox Received SMS messagesReading messages Press OK You can display the message by press- ingCalling the sender or another telephone Sending SMS messagesSender Network selection Cell Broadcast Call meters Call forwardingCall barring Fixed dial numbers Phone lockClosed user group Overview of the basic factory settings in the call menuGlossary Amplifier SpecificationsTuner TelephoneIndex Index Service numbers 042 175 873Bosch Gruppe
Top Page Image Contents