Blaupunkt TCM 169 Set charge parameters, Audible call timer, PIN code, Entered

Page 52

Programming with DSC Telephone –Setup menu

After this, you can enter a charge per unit and a credit balance.

If a charge or credit balance has already been entered, the last character will flash in the display.

Use the numbers keys to alter the amount and the type of currency.

Press CL to quit the menu item.

The alteration will be transferred to the SIM card.

Note:

If “0.00” appears in the display, the credit balance function is deactivated.

Set charge parameters

If you cannot use AOC, you can set an in- ternal charge counter. You can enter the charge per minute.

•Press OK.

•Enter the access code.

•Press OK.

•Select home or roaming network charge by pressing / and press

•Enter the charge and type of currency with the numbers keys.

•Confirm your entry by pressing OK.

Note on AOC/charge parameters

Because the charges per time unit may vary, the charge meter can be used only as an approximate point of reference.

Audible call timer

You can set an audible beep which is emit- ted after a preset call time has elapsed.

Press << / >> to switch the beep on or off.

You can use the selection buttons to alter the setting from between 15 and 300 sec- onds. The cursor will flash at the last digit of the value entered.

After you have pressed OK, “Audible call timer” will appear in the display. You can select the next menu item.

PIN code

Switches on/off and alters the PIN code.

Press << / >> to switch between On, Alter, Off. An arrow will indicate the setting select- ed last.

If you wish to alter the setting, press OK. Enter the PIN code and press OK to con- firm your entry.

On	– Each time the SIM card is in-
	serted, the PIN code must be
	entered.

IMPORTANT!

If the PIN code is entered incorrectly three times in succession, the SIM card will be deactivated. It can only be reactivated after the master PIN (PUK) has been entered. Your service provider has more detailed in- formation.

Alter	–	You must enter the currently
		valid PIN code, then enter the
		new PIN code (twice)
Off	–	The set can be operated with-
		out a PIN code.

The “Off” menu item cannot be selected unless the SIM card allows this.

OK.

116

Image 52

Contents Monte Carlo TCM Remote control RCT 07 optional Contents Radio, Cassette, Changer Option Contents Telephone Safety standards Safety informationImportant information General informationUsing the telephone while driving Using the telephone in critical areasImportant information Emergency callsInstallation AccessoriesGuarantee International telephone informa- tionBasic information KeyCard and SIM cardStarting up the Radiophone Training or replace KeyCard/ SIM card using DSC KeyCard and SIM cardRemoving the KeyCard/SIM card Train KeyCard/SIM cardsDSC learn mode Displaying the radio pass dataOptical warning of anti-theft protection Care of your KeyCard/SIM cardOn/off Volume Switching the unit on/off with the KeyCardSwitching the unit on/off via the ig- nition Switching the radio on when the ig- nition is switched offTrack switch SRC SourceTS / BND Eject cassetteCassette loading slot Storing radio stationsRecalling stored radio stations -Se AF / #= MIX DisplayRadio operation a Cassette operation Changer operation optionalFlashing card tongue Tape operationStop this function by pressing or the opposite button Additional rocker switch functions Additional settings possible with AUDDSC mode C ME Unit Corresponding function must be activatedAudio mode AF Alternative FrequencyREG regional programme Radio, tape deck, CD changer optional, auxiliary sourceStation tuning Radio operation with RDS Radio Data SystemEntering the frequency directly Selecting a wavebandScrolling through the broadcast- ing networks FM only Storing radio stationsSwitching from stereo to mono FM only Selecting the seek-tuning sensi- tivityRecalling stored radio stations Switching traffic announcement priority on/off Automatic seek tuning startSwitching off the beep tone Traffic programme station reception with RDS-EONOperating the cassette deck Operating the cassette deck Tape equalisationDolby B NR Care instructionsCD changer operation optional Switching CD changer operation onSelecting the CD and the track Cancel SelectAlter Store= ignition timer switched off Programming with DSC Radio, Cassette, Changer optionalCards can only be programmed with the help of the DSC menu Music/voice is switched offOn All of the menu items are available You can choose among the following oper- ating modes End DSC programming/save changesOverview of the DSC default settings Telephone operation Operating the telephone PIN codeInserting the SIM card/ entering your PIN code Reactivating the SIM cardOperating the telephone Making your first telephone callGSM emergency calls Do not hang up until you are told to do soQuick reference for using the telephone VolumeOn/Off Selection buttonsEnter PIN code Setup menu/Call menu To switch back to the telephone mode Press brieflyDisplays Radio menu Telephone-book menu@ Rocker switch Using the telephone GSM network service areaSwitching to telephone mode Save telephone numbers and namesUsing the telephone Dialling a telephone numberRedial function Answering/ending a callAutomatic Save telephone numbers from the note- padCall waiting 2nd caller Broker’s call/holdMaking telephone calls using the handset special accessory Setting up a conference callConference calls International callsHow to place telephone calls in foreign countries How to receive callsTeleph. number Blaupunkt You enter +49512149 TipPhone book menu 107How to enter a name/text Phone book menuFinding an entry by name Show my phone number Prevent accessCheck capacity Finding an entry by position Add entryAltering, deleting, moving or copying the entry Press CL, the altered setting will not be stored Programming with DSC TelephoneStore/confirm End DSCProgramming with DSC Telephone -Setup menu Programming in the setup menuSelect the setup menu by pressing 113Ringing tone volume Automatic answer Operating mode Hands-free volumeHandset volume Automatic redialSMS tone Call meter formatAudible call timer Set charge parametersPIN code EnteredAlter access code Following settings will be deletedExternal alarm Be sure to make a note of the new code if you change itOverview of the basic factory settings in the set-up menu Extended menu Ring signalHands-free channel TA during call Hands-free operation is possible on all four channelsPress CL, the new setting will not be stored Programming with DSC Telephone -Call menuProgramming in the Call Menu 119Call mailbox Received SMS messages Selecting the messageReading messages Press OK You can display the message by press- ingSending SMS messages Calling the sender or another telephoneSender Network selection Cell Broadcast Call forwarding Call metersCall barring Phone lock Fixed dial numbersOverview of the basic factory settings in the call menu Closed user groupGlossary Specifications AmplifierTuner TelephoneIndex Index 042 175 873 Service numbersBosch Gruppe