Alpine CDA-7878R owner manual Recalling Preset RDS Stations, Receiving RDS Regional Local Stations

Page 18

RDS Operation

TUNE

T.INFO

Preset buttons (1 through 6)

g DN f UP SETUP/F AF PTY

Recalling Preset RDS Stations

1 Press the "F" button. The indicator will illuminate.

2 Press the AF button to activate the RDS mode. The display shows "AF" when the RDS mode is activated.

3 Press the "F" button to activate the normal mode.

The indicator will turn off.

4 Press the 1 through 6 buttons in which your desired RDS station is preset. If the preset station's signal is weak, the unit automatically searches and tunes to a stronger station in the AF (Alternative Frequencies) list.

5 If the preset station and the stations in the AF list cannot be received:

When the PI SEEK setting is on (refer to "PI SEEK Setting" on page 17), the unit searches again for a station in the PI (Programme Identification) list.

If there are still no stations receivable in the area, the unit displays the frequency of the preset station and the preset indicator disappears.

If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset button to tune in a Regional station in other district.

NOTE

For presetting the RDS stations, refer to the Radio Operation section. The RDS stations can be preset in the FM1, FM2 and FM3 bands only.

Receiving RDS Regional (Local) Stations

1 Press and hold the SETUP button for at least 2 seconds to activate the setting mode.

2 Press the f UP button repeatedly to select "REGIONAL". Each press of the f UP button scrolls the modes as shown:

FM-LEVEL↔REGIONAL↔ PI SEEK ↔TUNER↔SUB-W

	↔	↔
	DEMO	SUB-W
	↔	SUB-W
	↔	(switching phase)∗
	CONTRAST	(switching phase)∗
	↔	↔
	AUX	SUB-W
	↔	STEREO/MONO∗
	MUTE	STEREO/MONO∗
	MUTE	↔
	↔	↔

SCROLL ↔ BEEP ↔ DISC/FOLDER ↔ SRC DHE

∗Displayed when you set SUB-W to ON.

NOTE

If you press the g DN button, the display scrolls in reverse sequence.

3 Press the TUNE button to turn on or off the "REGIONAL" mode.

In the "REGIONAL OFF" mode, the unit automatically keeps receiving the related local RDS station.

4 Press the SETUP button to deactivate the setting mode.

16-EN

Image 18

Contents CDA-7878R Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Detaching the Front Panel Connectable to Remote Control Interface BoxBasic Operation Attaching the Front PanelPress the Power button to turn on the unit Turning Power On and OffDisplay Angle Adjustment → Balance → Fader → VolumeContrast Adjusting Source Signal LevelSUB-W AUX SUB-WTurning Mute Mode On/Off Switching the Phase of the Subwoofer OutputSetting the Subwoofer Output Sound Beep Guide FunctionScroll Setting Setting the AUX Mode V-LinkContrast SUB-W Switching the Tuner Mode DemonstrationDefeat Source Blackout Mode On and OffSwitching the Display Modes SRC DHE onSearching for Titled Discs MP3 modeDisplaying the Title/Text About Title and TextTitling Discs Erasing Disc TitleManual Tuning Automatic Seek TuningRadio Operation Automatic Memory of Station Presets Tuning to Preset StationsSetting RDS Reception Mode and Receiving RDS Stations RDS OperationRecalling Preset RDS Stations Receiving RDS Regional Local StationsReceiving Traffic Information PI Seek SettingPTY Programme Type Tuning → Light M ↔ Classics ↔ Other M ←When traffic information stations cannot be received Receiving Traffic Information While Playing CD or RadioPriority PTY Programme Type Displaying Radio Text Opening and Closing the Movable display Playback→ Tuner → CD → CD CHANGER∗ Repeat Play Music Sensor SkipFast Forward and Backward Some of the following CDs may not play on this unitCD Player Operation X. Random PlayScanning Programmes When a 12-disc CD Changer is connected Multi-Changer SelectionMP3 Operation Playing MP3 FilesSelecting Folders File SearchAbout MP3 Setting the Range of MP3 File SelectionWhat is MP3? Method for creating MP3 filesProducing MP3 discs Supported playback sampling rates and bit ratesID3 tags Media supportedEqualizer Presets Adjusting the Sound OperationSelecting DHE Mode Selecting directlyRecalling the Stored Equalizer Curve Adjusting and Storing Equalizer CurveTo store the adjusted contents Choosing the Listening Position Selector L.P.SCrossover/Time Correction Example 1. Listening Position Front Left Seat Example 2. Listening Position All SeatsDivider button Adjust the output level Adjusting and Storing the Crossover/ Time CorrectionAdjust the cut-off frequency/slope Way systemStoring the adjustments Adjusting the Time CorrectionPress the Band button to select the channel to be adjusted Direct RecallingCustomized Sound Database Remote Control Operation Controls on Remote ControlOperating the Audio Processor Recalling StepsAdjusting/Storing the CROSSOVER/TIME Correction Battery Replacement Information Case of DifficultyNo Magazine Specifications FM Tuner SectionInstallation and Connections PrecautionsInstallation RemovalConnections To prevent external noise from entering the audio systemSubwoofer Output RCA Connectors Front Output RCA ConnectorsSwitched Power Lead Ignition Red Rear Output RCA Connectors Power Antenna Lead Blue RCA Extension cable Sold Separately

Related manuals

Manual 47 pages 20.51 Kb