Basic Operation
| BAND MODE/Audio Control | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
g DN f UP TITLE
Titling Discs
It is possible to title your favourite CD's.
1 Press the TITLE button and select the title display mode.
For details, see “Displaying the Title/Text” (page 11).
2 Press and hold the TITLE button for at least 2 seconds. The first character will blink.
3 Press the BAND button to select the characters/ symbols.
→Upper case → Lower case → Numeral/Symbol
4 Rotate the Audio Control knob to select the desired letter/numeral/symbol available for naming. (“A” for example).
5 Press the MODE button to store the first character. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title.
6 Repeat the steps 3 to 5 above to complete the titling. Pressing the MODE button after entering the 12th character, automatically stores the title into memory.
When entering a title of less than 12 characters (for example, 3 character title):
After entering 3 characters to complete your title, the 4th character space will be blinking. Go to step 7 to complete the title.
7 Press and hold the TITLE button for at least 2 seconds to record the title.
NOTES
•You can enter 24 CD titles on this unit. If you try to store beyond the limit, the display will show “FULL DATA.” At this point, no more titles can be stored.
•The CD Changer title length or memory capacity varies depending upon the model being used.
•To input a new title, one of the previously inputted titles must first be deleted.
•When you want to erase a title, enter the “
” symbol into all spaces.
•The operations described in steps 3 to 6 must be made within 10 seconds. The input mode will be cancelled if no action is taken for over 10 seconds.
•Removing power from the unit may delete these titles. Use caution when manipulating the power cord.
Erasing Disc Title
1 Press the TITLE button to select the titling mode. Then, press and hold the button for at least 2 seconds.
2 Press and hold the
3 Press the g DN or f UP button repeatedly until the title you want to erase is displayed.
4 Press and hold the
5 Press and hold the TITLE button for at least 2 seconds to cancel the title erasing mode.
NOTE
You cannot erase