Adjusting the Sound Operation
MODE/Audio Control
g DN
f UP
CSD
Customized Sound Database
The unit is equipped with a Customized Sound Database that creates the most suitable sound for your car type.
You can fine tune the sound effects by inputting the size of your front speaker or tweeter, whether there is a Subwoofer, and the material of your seats.
1 Press and hold the CSD button for at least 2 seconds.
2 Set your car type
Rotate the Audio Control knob to select your car type, then press the MODE button.
3 Setting the front speaker
Rotate the Audio Control knob to select the front speaker type, then press the MODE button.
→10 cm ←→ 13 cm ←→ 16 cm ←
(DDDrive is an Alpine product)
4 Set the separate tweeter
Rotate the Audio Control knob to select whether the unit has a separate tweeter or not, then press the MODE button.
W/O TWEETER | ←→ W/ TWEETER |
(without separate | (with separate |
tweeter) | tweeter) |
5 Set the subwoofer
Rotate the Audio Control knob to select whether the unit has a subwoofer or not, then press the MODE button.
W/O
(without Subwoofer) (with Subwoofer)
6 Set the material of your seats
Rotate the Audio Control knob to select your seats’ material, then press the MODE button.
CLOTH ←→ LEATHER
7 Complete the settings
After completing the settings, rotate the Audio Control knob to select CSD OK, then press the MODE button.
CSD OK? ←→ CSD NO?
CSD OK: The unit automatically customizes the sound effect according to the above settings.
CSD NO: Returns to “Set your car type” in step 2.
NOTES
•This function is inoperable when DEFEAT is ON (refer to page 9).
•While making a setting, press and hold the CSD button for at least 2 seconds to cancel the setting.
•Press the g DN or f UP button to go forward or backward to the next/preceding step.