Alpine CDA-7878R owner manual Specifications, FM Tuner Section

Specifications

FM TUNER SECTION

Tuning Range	87.5 – 108.0 MHz
Mono Usable Sensitivity	0.7 µV
Alternate Channel Selectivity	90 dB
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB
Capture Ratio	2.0 dB
MW TUNER SECTION
Tuning Range	531 – 1,602 kHz
Sensitivity (IEC Standard)	25.1 µV/28 dB
LW TUNER SECTION
Tuning Range	153 – 281 kHz
Sensitivity (IEC Standard)	31.6 µV/30 dB
CD SECTION
Frequency Response	5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)	Below measurable limits
Total Harmonic Distortion	0.008% (at 1 kHz)
Dynamic Range	95 dB (at 1 kHz)
Signal-to-Noise Ratio	95 dB
Channel Separation	85 dB (at 1 kHz)
PICKUP
Wave length	655 nm
Laser power	CLASS II

REMOTE CONTROL

Battery Type	"AAA" sized dry battery
Battery Quantity	2
Dimensions (W ⋅ H ⋅ D)	42 mm (1-21/32")
	⋅ 121 mm (4-25/32")
	⋅ 23 mm (29/32")
Weight (without battery)	50 g (1.8 oz)
GENERAL
Power Requirement	14.4 V DC
	(11–16 V allowable)
Maximum Power Output	45 W ⋅ 4
Maximum Pre-Output Voltage	4 V/10k ohms
Weight	1.8 kg (3 lbs. 15 oz)
CHASSIS SIZE
Width	178 mm (7")
Height	50 mm (2")
Depth	155 mm (6-1/8")
NOSEPIECE SIZE
Width	170 mm (6–11/16")
Height	46 mm (1-13/16")
Depth	24 mm (15/16")

Due to continuous product improvement, specifications and design are subject to change without notice.

CAUTION

CLASS 1

LASER PRODUCT

(Bottom side of player)

CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM

(Bottom side of player)

41-EN