Alpine CDA-7878R Adjusting and Storing Equalizer Curve, Recalling the Stored Equalizer Curve

Page 31
Press the MODE button to flash the next frequency band indication.

Adjusting and Storing the

Equalizer Curve

You can modify the Equalizer settings to create a response curve more appealing to your personal taste.

1 Select the equalizer characteristic to adjust. See "Equalizer Presets" (on page 28).

2 Press the MODE button. The Frequency band indication in the display flashes.

3 Rotate the Audio Control knob to adjust to your desired level.

4

5 Rotate the Audio Control knob to adjust to your desired level.

6 Repeat the steps 4 to 5 above until all the frequency bands (16 kHz) are adjusted.

To store the adjusted contents

1)Press and hold the MODE button for at least 2 seconds.

The display flashes and you can store the adjusted curve.

(When pressing one of the 1 - 6 buttons, you can also store the adjusted curve.)

2)While the display is blinking, press one of the 1 - 6 buttons that you want to store.

NOTE

The contents of DHE/EQ can be stored. (The settings of LPS are not stored.)

7 Press the DSP button to select OFF to return to normal mode.

NOTE

You can also select the frequency band to be adjusted by pressing the g DN button or f UP button.

Recalling the Stored Equalizer Curve

1 Press the DSP button to select EQ MEMORY mode.

→EQ ←→ EQ MEMORY ←→ LPS ←→ OFF ←

2 Press the g DN button or f UP button to select your desired curve form the MEMORY 1 - MEMORY 6.

Direct select

Press one of 1 - 6 buttons to activate your desired curve.

(If you select the PRESET 2)

3 Press the DSP button to select OFF to return to normal mode.

→EQ ←→ EQ MEMORY ←→ LPS ←→ OFF ←

NOTE

This function is inoperable when DEFEAT is ON (refer to page 9).

Choosing the Listening Position Selector (L.P.S.)

This feature gives the user the ability to adjust the time delay of the 4 main speakers to provide the ideal sound stage for each listener in the car. The staging can be optimized for the front passenger, driver, front passenger and driver, or front and rear passengers and driver.

1 Press the DISP button to select LPS mode.

→EQ ←→ EQ MEMORY ←→ LPS ←→ OFF ←

2 Press either g DN button or f UP button. The seat position will change every time the button is pressed.

Select the desired seat position.

→ OFF ← → ALL ← → FRONT ←

→FRONT-R ←→ FRONT-L ←

Direct select

Press the desired button from the 1 - 5 buttons.

[1]

: OFF

[4]

: FRONT-L

[2]

: ALL

[5]

: FRONT-R

[3]

: FRONT

 

 

3 Press the DSP button to select OFF to return to normal mode.

→EQ ←→ EQ MEMORY ←→ LPS ←→ OFF ←

NOTE

You cannot use the L.P.S. and Time Correction at the same time.

29-EN

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CDA-7878R Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Attaching the Front Panel Connectable to Remote Control Interface BoxBasic Operation Detaching the Front Panel→ Balance → Fader → Volume Turning Power On and OffDisplay Angle Adjustment Press the Power button to turn on the unitAUX SUB-W Adjusting Source Signal LevelSUB-W ContrastSound Beep Guide Function Switching the Phase of the Subwoofer OutputSetting the Subwoofer Output Turning Mute Mode On/OffSetting the AUX Mode V-Link Scroll SettingContrast SUB-W Demonstration Switching the Tuner ModeDefeat SRC DHE on Blackout Mode On and OffSwitching the Display Modes SourceAbout Title and Text MP3 modeDisplaying the Title/Text Searching for Titled DiscsErasing Disc Title Titling DiscsAutomatic Seek Tuning Manual TuningRadio Operation Tuning to Preset Stations Automatic Memory of Station PresetsRDS Operation Setting RDS Reception Mode and Receiving RDS StationsReceiving RDS Regional Local Stations Recalling Preset RDS Stations→ Light M ↔ Classics ↔ Other M ← PI Seek SettingPTY Programme Type Tuning Receiving Traffic InformationReceiving Traffic Information While Playing CD or Radio When traffic information stations cannot be receivedPriority PTY Programme Type Displaying Radio Text Playback Opening and Closing the Movable display→ Tuner → CD → CD CHANGER∗ Some of the following CDs may not play on this unit Music Sensor SkipFast Forward and Backward Repeat PlayX. Random Play CD Player OperationScanning Programmes Multi-Changer Selection When a 12-disc CD Changer is connectedPlaying MP3 Files MP3 OperationFile Search Selecting FoldersMethod for creating MP3 files Setting the Range of MP3 File SelectionWhat is MP3? About MP3Media supported Supported playback sampling rates and bit ratesID3 tags Producing MP3 discsSelecting directly Adjusting the Sound OperationSelecting DHE Mode Equalizer PresetsChoosing the Listening Position Selector L.P.S Adjusting and Storing Equalizer CurveTo store the adjusted contents Recalling the Stored Equalizer CurveCrossover/Time Correction Example 2. Listening Position All Seats Example 1. Listening Position Front Left SeatWay system Adjusting and Storing the Crossover/ Time CorrectionAdjust the cut-off frequency/slope Divider button Adjust the output levelDirect Recalling Adjusting the Time CorrectionPress the Band button to select the channel to be adjusted Storing the adjustmentsCustomized Sound Database Controls on Remote Control Remote Control OperationRecalling Steps Operating the Audio ProcessorAdjusting/Storing the CROSSOVER/TIME Correction Battery Replacement Case of Difficulty InformationNo Magazine FM Tuner Section SpecificationsPrecautions Installation and ConnectionsRemoval InstallationTo prevent external noise from entering the audio system ConnectionsPower Antenna Lead Blue RCA Extension cable Sold Separately Front Output RCA ConnectorsSwitched Power Lead Ignition Red Rear Output RCA Connectors Subwoofer Output RCA Connectors
Related manuals
Manual 47 pages 20.51 Kb
Top Page Image Contents