Alpine CDA-7878R owner manual Multi-Changer Selection, When a 12-disc CD Changer is connected

Page 25

Controlling CD Changer (Optional)

 

Multi-Changer Selection

An optional 6-disc or 12-disc CD Changer may be connected to the CDA-7878R if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of the CDA-7878R, the CD Changer will be controllable from the CDA-7878R.

Using the KCA-400C (Multi-Changer Switching device) or the KCA-410C (Versatile Link Terminal) multiple changers can be controlled by the CDA- 7878R.

See the Multi-Changer Selection section on page 23 for selecting the CD Changers.

NOTES

The controls on the CDA-7878R for CD Changer operation are operative only when a CD Changer is connected.

The “changer” indicator illuminates in the CD Changer mode.

The DVD changer (optional) is controllable from the CDA-7878R as well as the CD changer.

1Press the SOURCE button to activate the CHANGER mode. The display shows the “Changer,” disc number and track number.

NOTE

The source indicator varies depending on the connected source.

2Press the Disc Select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD playback starts.

NOTES

After selecting the desired disc, you can operate in the same way as for the CDA-7878R CD player.

For details, please see the CD Operation section.

If the indicator is illuminated the Disc Select buttons become nonfunctional.

When a 12-disc CD Changer is connected:

To select discs numbered from 1 to 6, the procedure is the same as for the 6-disc CD Changer. To select discs numbered from 7 to 12, first press the “F” button. This changes the “D” indicator to “d.” Then press the desired Preset button. With the “F” button activated, the Preset buttons 1 to 6 will represent discs 7 to 12 respectively.

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX).

1 Press the SOURCE button on the CDA-7878R to activate the CD Changer mode.

Alternatively, press the SOURCE button on the Remote Control (RUE-4187) to activate the CD Changer mode. Proceed to step 3 below to select the desired CD Changer.

SOURCE

BAND

2 Press the BAND button on the CDA-7878R or the RUE-4187 to activate the CD Changer Selection mode.

3 The CD Changer Selection mode remains active for 3 seconds after step 2 is performed. Press the BAND button until the desired CD Changer indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display will show “NO CHGR .”

Alternatively press the BAND button on the Remote Control until the desired changer indicator appears on the display.

4 To operate the selected changer, see “CD Player Operation” section.

NOTE

For further details about the external input (AUX) when using KCA-410C, see ”Setting the AUX Mode (V-Link)" on page 8.

23-EN

Image 25
Contents CDA-7878R Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Basic Operation Connectable to Remote Control Interface BoxDetaching the Front Panel Attaching the Front PanelDisplay Angle Adjustment Turning Power On and OffPress the Power button to turn on the unit → Balance → Fader → VolumeSUB-W Adjusting Source Signal LevelContrast AUX SUB-WSetting the Subwoofer Output Switching the Phase of the Subwoofer OutputTurning Mute Mode On/Off Sound Beep Guide FunctionSetting the AUX Mode V-Link Scroll SettingContrast SUB-W Demonstration Switching the Tuner ModeDefeat Switching the Display Modes Blackout Mode On and OffSource SRC DHE onDisplaying the Title/Text MP3 modeSearching for Titled Discs About Title and TextErasing Disc Title Titling DiscsAutomatic Seek Tuning Manual TuningRadio Operation Tuning to Preset Stations Automatic Memory of Station PresetsRDS Operation Setting RDS Reception Mode and Receiving RDS StationsReceiving RDS Regional Local Stations Recalling Preset RDS StationsPTY Programme Type Tuning PI Seek SettingReceiving Traffic Information → Light M ↔ Classics ↔ Other M ←Receiving Traffic Information While Playing CD or Radio When traffic information stations cannot be receivedPriority PTY Programme Type Displaying Radio Text Playback Opening and Closing the Movable display→ Tuner → CD → CD CHANGER∗ Fast Forward and Backward Music Sensor SkipRepeat Play Some of the following CDs may not play on this unitX. Random Play CD Player OperationScanning Programmes Multi-Changer Selection When a 12-disc CD Changer is connectedPlaying MP3 Files MP3 OperationFile Search Selecting FoldersWhat is MP3? Setting the Range of MP3 File SelectionAbout MP3 Method for creating MP3 filesID3 tags Supported playback sampling rates and bit ratesProducing MP3 discs Media supportedSelecting DHE Mode Adjusting the Sound OperationEqualizer Presets Selecting directlyTo store the adjusted contents Adjusting and Storing Equalizer CurveRecalling the Stored Equalizer Curve Choosing the Listening Position Selector L.P.SCrossover/Time Correction Example 2. Listening Position All Seats Example 1. Listening Position Front Left SeatAdjust the cut-off frequency/slope Adjusting and Storing the Crossover/ Time CorrectionDivider button Adjust the output level Way systemPress the Band button to select the channel to be adjusted Adjusting the Time CorrectionStoring the adjustments Direct RecallingCustomized Sound Database Controls on Remote Control Remote Control OperationRecalling Steps Operating the Audio ProcessorAdjusting/Storing the CROSSOVER/TIME Correction Battery Replacement Case of Difficulty InformationNo Magazine FM Tuner Section SpecificationsPrecautions Installation and ConnectionsRemoval InstallationTo prevent external noise from entering the audio system ConnectionsSwitched Power Lead Ignition Red Rear Output RCA Connectors Front Output RCA ConnectorsSubwoofer Output RCA Connectors Power Antenna Lead Blue RCA Extension cable Sold Separately
Related manuals
Manual 47 pages 20.51 Kb