Alpine CDA-7969R owner manual Radio Operation, Manual Tuning, Automatic Seek Tuning, 12-EN

Press the SOURCE button until a radio frequency appears in the display.

Press the SOURCE button until a radio frequency appears in the display.

Radio Operation

BAND SOURCE Preset buttons (F1 through F6)

TUNE/A.ME DN g f UP FF5

Manual Tuning

1

2 Press the BAND button repeatedly until the desired radio band is displayed.

Each press changes the band:

→FM1 → FM2 → FM3 → MW → LW

3 Press the TUNE button repeatedly until "DX SEEK" and "SEEK" disappear from the display.

NOTE

The initial mode is DX SEEK.

4 Press the DN g or f UP button to move downward or upward one step respectively until the desired station frequency is displayed.

NOTE

The ST indicator appears on the display when a Stereo FM station is tuned in.

Automatic Seek Tuning

1

2 Press the BAND button repeatedly until the desired radio band is displayed.

Each press changes the band:

→FM1 → FM2 → FM3 → MW → LW

3 Press the TUNE button to illuminate the DX and SEEK indicators in the display.

With the DX (Distance) mode activated, both strong and weak stations will be tuned in the Auto-Seek operation.

Press again to return to the local mode. The DX indicator will turn off and the SEEK indicator will remain illuminated. Now, only strong stations will be tuned.

4 Press the DN g or f UP button to automatically seek for a station downward or upward respectively.

The unit will stop at the next station it finds. Press the same button again to seek the next station.

12-EN