Alpine CDA-7969R owner manual Turning Emergency Alarm On or Off, Displaying Radio Text, 17-EN

Page 19

4 Press the F4 button to activate the PRIORITY PTY mode again.

To change the programme category, perform the step 3.

To disable the PRIORITY PTY function, press the F4 button.

NOTE

In the PRIORITY PTY function, unlike in the T.INFO function, the volume does not increase during operation.

5 Press the F button to activate the normal mode. The FUNC indicator will turn off.

NOTE

Operate the unit while the FUNC indicator is illuminated.

If no buttons are pressed within 5 seconds, the FUNC indicator will turn off.

Turning Emergency Alarm On or Off

1 Press and hold the INTLZ button for at least 2 seconds.

2 Press the f UP button repeatedly to select "PTY31" Each press of the f UP button scrolls the modes as shown.

FM-LE REG PTY31 AMBER DIM SUB BEEP D-OUT CLOSE DEMO AUX SCR MUTE

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button repeatedly to select the PTY31 ON or PTY31 OFF mode.

In the PTY31 ON mode, the unit will show "ALARM" in the display when the unit receives the PTY31 (Emergency Broadcast) signal.

4 Press and hold the INTLZ button for at least 2 seconds to activate the selected mode.

Displaying Radio Text

Text messages from a radio station can be displayed.

1 Tune in a radio station that transmits text messages.

2 Press the F button. The FUNC indicator will illuminate.

3 Press the F6 (R.TXT) button to activate the Radio Text mode. The display shows "WAIT" for a few seconds, then starts scrolling the text message. It continues until other operation is performed.

4 To cancel the Radio Text mode, press the F6 button.

5 Press the F button to return to the normal operation mode. The FUNC indicator disappears from the display.

NOTES

If there is no receivable text message or the unit cannot receive a text message properly, the display shows "NO TEXT" for 2 seconds.

Operate the unit while the FUNC indicator is illuminated.

If no buttons are pressed within 5 seconds, the FUNC indicator will turn off.

17-EN

Image 19
Contents CDA-7969R Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Hiding the Front Panel Turning Power On and OffBasic Operation Opening the Front PanelAdjusting Source Signal Level Display Angle Adjustment→ Volume → Balance → Fader Dimmer Control Changing Backlighting ColourCD Text Scroll Setting Turning Mute Mode On/OffOUT ← Close ← Demo ← AUX ← SCR ← Mute ← Switching the Display Modes Setting the AUX Mode Blackout Mode On and OffSelecting DHE Mode Adjusting the built-in Audio Processor10-EN Equalizer PresetsAdjusting the Equalizer Settings Memorizing the Equalizer Settings11-EN Adjusting the Time CorrectionMemorizing the Time Correction Setting Recalling the Memorized Time Correction Setting12-EN Manual TuningAutomatic Seek Tuning Radio Operation13-EN Automatic Memory of Station PresetsRDS Operation Setting RDS Reception Mode and Receiving RDS StationsRecalling Preset RDS Stations When the RDS station signal received has become weak15-EN PTY Programme Type TuningReceiving RDS Regional Local Stations Receiving Traffic Information16-EN When traffic information stations cannot be receivedReceiving Traffic Information While Playing CD or Radio Priority PTY Programme TypeDisplaying Radio Text Turning Emergency Alarm On or Off17-EN Playback CD Player OperationOpening and Closing the Movable display Digital Output On and OffX. Random Play Music Sensor SkipFast Forward and Backward Repeat PlayAbout Title and Text Displaying the Title/TextTitling Discs 20-EN21-EN When a 12-disc CD Changer is connectedErasing Disc Title Controlling CD Changer Optional22-EN Multi-Changer SelectionControls on Remote Control Remote Control Operation23-EN 24-EN Battery ReplacementCase of Difficulty Information25-EN 26-EN HIGH-TEMP27-EN SpecificationsPrecautions Installation and Connections28-EN 29-EN InstallationRemoval 30-EN ConnectionTo prevent external noise from entering the audio system 31-EN32-EN