Alpine CDA-7969R owner manual Changing Backlighting Colour, Dimmer Control

Press and hold the INTLZ button for at least 2 seconds again to return to normal operation.

4

3 Press the TUNE button to turn on or off the DEMO mode.

Each press toggles between DEMO ON and

DEMO OFF.

If no buttons are pressed 30 seconds after the DEMO mode is turned ON, "DEMO" blinks 3 times in the display. The DEMO mode then begins.

NOTE

The initial setting at the factory is "DEMO OFF."

button the display scrolls in

NOTE

If you press the DN g reverse sequence.

Audio Mute Function

Activating this function will instantly lower the volume level by 20 dB.

1 Press the MUTE button to activate the MUTE mode. The audio level will decrease by about 20 dB.

Pressing the MUTE button again will bring the audio back to its previous level

Demonstration

This unit has the Demonstration feature which simulates the display functions.

1 Press and hold the INTLZ button for at least 2 seconds.

2 Press the f UP button to select the DEMO mode. Each press changes the modes as shown:

→ FM-LE→ REG → PTY31 → AMBER → DIM → SUB → BEEP

D-OUT← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←

Basic Operation

Audio Control INTLZ MODE

MUTE TUNE DN g f UP

Changing Backlighting Colour

1 Press and hold the INTLZ button for at least 2 seconds.

2 Press the f UP button repeatedly to select "AMBER".

Each press of the f UP button changes the modes as shown:

NOTE

If you press the DN g button the display scrolls in reverse sequence.

→FM-LE → REG → PTY31 → AMBER → DIM → SUB → BEEP D-OUT ← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←

3 Press the TUNE button to toggle the mode between AMBER ON (amber) and AMBER OFF (green).

4 Press and hold the INTLZ button for at least 2 seconds to set the selected mode.

Dimmer Control

Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit's backlighting is too bright at night.

1 Press and hold the INTLZ button for at least 2 seconds.

2 Press the f UP button repeatedly to select "DIM (DIMMER)".

Each press of the f UP button scrolls the modes as shown:

→FM-LE → REG → PTY31 → AMBER → DIM → SUB → BEEP D-OUT ← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to select the Dimmer mode. Each press toggles between DIMMER AUTO and DIMMER MANU.

4 Press and hold the INTLZ button for at least 2 seconds to activate the normal mode.

6-EN