7-EN
Press and hold the INTLZ button for at least 2 seconds to set the selected mode.
4
→ FM-LE→ REG → PTY31 → AMBER → DIM → SUB → BEEP
D-OUT← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←
3 Press the TUNE button to toggle the mode between BEEP ON and BEEP OFF.
NOTE
The initial setting at the factory is BEEP ON.
button the display scrolls in
NOTE
If you press the DN g reverse sequence.
3 Press the TUNE button to toggle mode between SUB-W ON and SUB-W OFF.
If an Ai-NET compatible processor with Subwoofer output is connected:
Press the TUNE button after selecting the SUB-W ON mode, and the subwoofer output phase is toggled NORMAL (0°) or REVERS (180°).
4 Press and hold the INTLZ button for at least 2 seconds after setting the SUB-W ON.
5 Press the MODE button repeatedly to select the SUB-W mode.
→ SUB-W→ BALANCE → FADER → VOLUME
6 Rotate Audio Control knob until the desired sound is obtained in each mode.
Sound (Beep) Guide Function
This function will give audible feedback with varying tones depending upon the button pressed.
1 Press and hold the INTLZ button for at least 2 seconds.
2 Press the f UP button repeatedly to select "BEEP."
Each press of the f UP button changes the modes as shown:
button the display scrolls in
NOTE
If you press the DN g reverse sequence.
Subwoofer On and Off
1 Press and hold the INTLZ button for at least 2 seconds.
2 Press the f UP button repeatedly to select "SUB."
Each press of the f UP button changes the modes as shown:
→ FM-LE→ REG → PTY31 → AMBER → DIM → SUB → BEEP
D-OUT← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←
Turning Mute Mode On/Off
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. This function can be turned ON or OFF from the head unit by following procedure below.
1 Press and hold the INTLZ button for at least 2 seconds.
2 Press the f UP button to select the MUTE mode. Each press changes the modes as shown:
→FM-LE → REG → PTY31 → AMBER → DIM → SUB → BEEP
D-OUT ← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←
NOTE
If you press the DN g button the display scrolls in reverse sequence.
3 Press the TUNE button to turn on or off the Mute mode.
Each press toggles between the MUTE ON and OFF modes.
NOTE
The initial setting at the factory is "MUTE ON."
4 Press and hold the INTLZ button for at least 2 seconds again to return to normal operation.
CD Text Scroll Setting
This CD player has the ability to scroll the disc and track name recorded on CD-Text discs. The scrolling feature will work with names greater than 12 characters. This feature will not work for the 12 character titles that were input manually.
1 Press and hold the INTLZ button for at least 2 seconds.
2 Press the f UP button repeatedly to select "SCR (SCROLL)".
Each press of the f UP button changes the modes as shown:
→FM-LE → REG → PTY31 → AMBER → DIM → SUB → BEEP
D-OUT ← CLOSE ← DEMO ← AUX ← SCR ← MUTE ←
NOTE
If you press the DN g button the display scrolls in reverse sequence.
3 Press the TUNE button to toggle mode between SCROLL AUTO and MANU.
•SCROLL AUTO: the display of CD text is scrolled continuously.
•SCROLL MANU: the display is scrolled only when a disc is loaded or when a track is changed.
4 When the setting is completed, press and hold the INTLZ button for at least 2 seconds to return to the normal mode.
NOTES
•Initial mode is "SCROLL MANU".
•The unit scrolls only CD text names. The disc titles input manually (refer to page 20) cannot be scrolled.
•The display of CD text will scroll even for text less than 12 characters.