Alpine CDA-7969R owner manual Multi-Changer Selection, 22-EN

Page 24

CD Player Operation

SOURCEBAND/T.S.M.

DN g f UP

Searching for Titled Discs/CD Text

If a CD is titled, you can do a search for it. You can also search for CD TEXT discs by title. (To title CDs, refer to "Titling Discs" on page 20.)

1 Press and hold the T.S.M. button for at least 2 seconds. The title blinks in the display.

2 Press the DN g or f UP button to select the desired disc title/CD Text disc.

1 Press the SOURCE button on the CDA-7969R to activate the CD Changer mode.

Alternatively, press the SOURCE button on the Remote Control (RUE-4185) to activate the CD Changer mode. Proceed to Step 3 below to select the desired CD Changer.

CD-CHG

 

 

BAND

SOURCE

A.PROC

PROG

 

 

BAND

 

SOURCE

REMOTE CONTROL UNIT RUE-4185

3 Press the T.S.M. button to play the selected disc. The unit will automatically search for the disc and begin play.

NOTES

•This function cannot be performed when using a multi- changer switching device.

•To search for a title from CD TEXT discs, first you need to playback the CD TEXT disc at least once so that it is registered in the unit’s memory.

Multi-Changer Selection

Alpine's Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers.

2 Press the BAND button on the CDA-7969R or the RUE-4185 to activate the Changer Selection mode.

3 The CD Changer Selection mode remains active for 3 seconds after Step 2 is performed. Press the BAND button until the desired CD Changer indicator appears on the display.

NOTE

If the selected CD Changer is not connected, the display will show "NO CHANGER."

Alternatively press the BAND button on the Remote Control until the desired changer indicator appears on the display.

4 To operate the selected changer, see "CD Operation" section.

22-EN

Page 23 Page 25
Image 24
Page 23 Page 25
Contents CDA-7969R Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Turning Power On and Off Basic OperationOpening the Front Panel Hiding the Front PanelDisplay Angle Adjustment Adjusting Source Signal Level→ Volume → Balance → Fader Changing Backlighting Colour Dimmer ControlTurning Mute Mode On/Off CD Text Scroll SettingOUT ← Close ← Demo ← AUX ← SCR ← Mute ← Setting the AUX Mode Blackout Mode On and Off Switching the Display ModesAdjusting the built-in Audio Processor Selecting DHE ModeEqualizer Presets Adjusting the Equalizer SettingsMemorizing the Equalizer Settings 10-ENAdjusting the Time Correction Memorizing the Time Correction SettingRecalling the Memorized Time Correction Setting 11-ENManual Tuning Automatic Seek TuningRadio Operation 12-ENAutomatic Memory of Station Presets 13-ENSetting RDS Reception Mode and Receiving RDS Stations Recalling Preset RDS StationsWhen the RDS station signal received has become weak RDS OperationPTY Programme Type Tuning Receiving RDS Regional Local StationsReceiving Traffic Information 15-ENWhen traffic information stations cannot be received Receiving Traffic Information While Playing CD or RadioPriority PTY Programme Type 16-ENTurning Emergency Alarm On or Off Displaying Radio Text17-EN CD Player Operation Opening and Closing the Movable displayDigital Output On and Off PlaybackMusic Sensor Skip Fast Forward and BackwardRepeat Play X. Random PlayDisplaying the Title/Text Titling Discs20-EN About Title and TextWhen a 12-disc CD Changer is connected Erasing Disc TitleControlling CD Changer Optional 21-ENMulti-Changer Selection 22-ENRemote Control Operation Controls on Remote Control23-EN Battery Replacement 24-ENInformation Case of Difficulty25-EN HIGH-TEMP 26-ENSpecifications 27-ENInstallation and Connections Precautions28-EN Installation 29-ENRemoval Connection 30-EN31-EN To prevent external noise from entering the audio system32-EN
Top Page Image Contents