Alpine CDA-7969R CD Player Operation, Opening and Closing the Movable display, Playback, 18-EN

Page 20

CD Player Operation

INTLZ

TUNE/-/JDN g f UP

Opening and Closing the Movable display

1 Press the c button.

The movable display will open.

To close the movable display, press the c button again.

The movable display will close.

NOTES

Do not apply shock to the movable display when it is open as it may result in malfunction of the unit.

The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses.

The display will stop at the set angle when closing.

CAUTION

Keep hands (or any other object) away from the display while it is opening or closing to avoid damage or injury. The back of the movable display will get very warm under normal operating conditions. This is not a malfunction. Do not touch.

Digital Output On and Off

If an optional Digital Phase Processor with the optic digital connector is Ai-NET connected, turn the digital output on or off as described below.

1 Press and hold the INTLZ button for at least 2 seconds.

2 Press the f UP button repeatedly to select "D- OUT".

Each press of the f UP button scrolls the modes as shown:

F3 F4 F5 c

FM-LE REG PTY31 AMBER DIM SUB BEEP D-OUT CLOSE DEMO AUX SCR MUTE

NOTE

If you press the DN g button the display scrolls in reverse sequence.

3 Press the TUNE button to select the D-OUT mode. Each press toggles between the D-OUT ON and D-OUT OFF.

4 Press and hold the INTLZ button for at least 2 seconds to activate the normal mode.

Playback

1 Press the c button.

The movable display will open.

Insert a disc with the label side facing up.

2 Insert a disc with the label side facing up.

The disc will be pulled into the unit automatically. The movable display will close and playback will begin.

When a disc is already inserted, press the SOURCE button to switch to the CD mode. The mode will change every time the button is pressed.

TUNER CD CD CHANGER

(Only when the CD changer is connected)

3 To pause playback, press the -/Jbutton. Pressing the -/Jbutton again will resume playback.

18-EN

Image 20
Contents CDA-7969R Alpine CD Changers Give You More Contents Precautions Never Attempt the Following Turning Power On and Off Basic OperationOpening the Front Panel Hiding the Front Panel→ Volume → Balance → Fader Display Angle AdjustmentAdjusting Source Signal Level Changing Backlighting Colour Dimmer ControlOUT ← Close ← Demo ← AUX ← SCR ← Mute ← Turning Mute Mode On/OffCD Text Scroll Setting Setting the AUX Mode Blackout Mode On and Off Switching the Display ModesAdjusting the built-in Audio Processor Selecting DHE ModeEqualizer Presets Adjusting the Equalizer SettingsMemorizing the Equalizer Settings 10-ENAdjusting the Time Correction Memorizing the Time Correction SettingRecalling the Memorized Time Correction Setting 11-ENManual Tuning Automatic Seek TuningRadio Operation 12-ENAutomatic Memory of Station Presets 13-ENSetting RDS Reception Mode and Receiving RDS Stations Recalling Preset RDS StationsWhen the RDS station signal received has become weak RDS OperationPTY Programme Type Tuning Receiving RDS Regional Local StationsReceiving Traffic Information 15-ENWhen traffic information stations cannot be received Receiving Traffic Information While Playing CD or RadioPriority PTY Programme Type 16-EN17-EN Turning Emergency Alarm On or OffDisplaying Radio Text CD Player Operation Opening and Closing the Movable displayDigital Output On and Off PlaybackMusic Sensor Skip Fast Forward and BackwardRepeat Play X. Random PlayDisplaying the Title/Text Titling Discs20-EN About Title and TextWhen a 12-disc CD Changer is connected Erasing Disc TitleControlling CD Changer Optional 21-ENMulti-Changer Selection 22-EN23-EN Remote Control OperationControls on Remote Control Battery Replacement 24-EN25-EN InformationCase of Difficulty HIGH-TEMP 26-ENSpecifications 27-EN28-EN Installation and ConnectionsPrecautions Removal Installation29-EN Connection 30-EN31-EN To prevent external noise from entering the audio system32-EN